Philips mz 33 (126 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to change the fuse in the mains plug?
To change the fuse in the mains plug, first remove the fuse cover and the existing fuse. Install a new BS1362 5 Amp, A.S.T.A. or BSI approved fuse. Replace the fuse cover. Ensure the fuse rating is 5 Amp if a fuse is included in the plug, and the distribution board fuse should not exceed 5 Amp.
What should I do if the mains plug is not suitable for my socket?
If the mains plug is not suitable for your socket outlets, cut off the existing plug and replace it with an appropriate one. Ensure the new plug is compatible with your socket type to avoid electrical hazards.
How to connect the mains plug wires?
The mains lead wires are colored blue (neutral) and brown (live). Connect the blue wire to the terminal marked N or black, and the brown wire to the terminal marked L or red. Do not connect either wire to the earth terminal marked E or green/yellow.
What is the purpose of the RDS/CLOCK function?
The RDS/CLOCK function displays RDS information and allows you to set the clock. It can automatically synchronize the clock with a radio station's time signal if RDS is available, or you can manually set the time using the volume control.
How to set the clock manually?
To set the clock manually, press the CLOCK button while in standby mode. The hour digits will flash. Use the volume control to adjust the hours clockwise for increasing or anti-clockwise for decreasing. Press CLOCK again to set the minutes using the same method.
How to activate the timer function?
To activate the timer, press the PROGRAM button for more than 2 seconds in standby mode. The display will show the current time and allow you to set the desired time using the volume control. Confirm the time by pressing CLOCK.
What are the different play modes for the CD player?
The CD player offers SHUFFLE and REPEAT modes. SHUFFLE plays tracks in random order, while REPEAT plays the current track continuously. These modes can be combined with PROGRAM to create custom playlists or repeat entire CDs.
How to program a CD track list?
To program a CD track list, press PROGRAM to enter programming mode. Use the track number buttons to select the desired tracks in the desired order. Confirm each selection by pressing PROGRAM. Up to 40 tracks can be stored in the memory.
How to tune to a radio station?
To tune to a radio station, select the TUNER source and press the TUNING button (or the corresponding remote control button). The radio will automatically search for a station with sufficient reception. Use the BAND button to select the desired frequency range (FM, MW, AM, or LW).
How to clean the CD player lens?
To clean the CD player lens, use a soft, lint-free cloth and wipe in a straight line from the center towards the edge. Do not use cleaning agents or abrasive materials, as they may damage the lens. Always keep the CD compartment closed to prevent dust accumulation.