mspa Tekapo (64 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I inflate the spa?
To inflate the spa, press the BUBBLE button. Continue pressing until the manometer points to the YELLOW section. Once inflated, disconnect the inflation hose and rotate the air valve cap back.
What should I check before using the spa for the first time?
Before using the spa for the first time, ensure that the surface is flat, stable, and can support the maximum load of a filled spa. Check if there are no sharp objects nearby, install an adequate drainage system around the spa, and make sure all parts are properly installed.
How do I adjust air pressure in my spa?
Use the manometer to check the air pressure inside your spa. If it points to the YELLOW section after inflation or when leaving unattended outdoors at temperatures above 20°C (68°F), add more air. If it reaches WHITE, press the black button on the bottom of the manometer to release some air until the pointer returns to GREEN or YELLOW.
What is the recommended water temperature for spa use?
The recommended water temperature should not exceed 40°C (104°F) for general use. For pregnant women, it's advised to limit the temperature to 38°C (100°F). Always measure the water temperature with an accurate thermometer before entering.
How do I test the PRCD on my spa?
To test the PRCD: plug in the machine, press RESET until the indicator turns red. Then press TEST; if the red color disappears, it's working properly. If not, contact a qualified electrician for repair.
What should I do if there is no water in my spa?
Ensure that you fill the spa to at least the minimum line before operating it. Do not use the spa until the water reaches this level. Also, avoid dragging or moving the spa after filling with water.
How often should I clean and maintain my spa?
Clean your spa regularly by draining and refilling it with fresh water every 3-5 days. Use a chemical kit for disinfection as per manufacturer instructions. Always check that all parts are secure, especially the filter cartridge and cover.
What safety precautions should I take when using my spa?
Always supervise children around the spa to prevent accidental drowning. Ensure the floor can support the expected load, avoid leaving the spa unattended outdoors at high temperatures, and never use the spa if it is damaged or malfunctioning.
How do I operate the controller on my spa?
Use the control panel with buttons for UVC, Heater, Filter, BUBBLE, TIMER, UP, and DOWN. Press the appropriate button to adjust settings such as water temperature, filtration, bubble function, or timer duration.
What should I do if my spa is not heating properly?
Check that the cover is securely locked in place to prevent heat loss. Ensure there are no leaks and verify that all electrical connections are working correctly. If issues persist, contact an authorized service center for further assistance.
Related products from mspa
C-BE062
User manual 68 pages
C-BE062
User manual 90 pages
C-BE062
User manual 72 pages
C-TE042
User manual 68 pages
C-TE042
User manual 68 pages
C-TE042
User manual 72 pages
C-TE042
User manual 90 pages
Ottoman
User manual 68 pages
Ottoman
User manual 90 pages
Ottoman
User manual 68 pages
Ottoman
User manual 64 pages
Ottoman
User manual 32 pages
C-BE061 Bergen
User manual 64 pages
C-TE061 Tekapo
User manual 64 pages
Starry
User manual 90 pages
Starry
User manual 68 pages
Starry
User manual 68 pages
Starry
User manual 32 pages
Starry
User manual 64 pages
C-OM061 Ottoman
User manual 64 pages