ABB S800-AUX (2 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the ABB S800-AUX used for?
The ABB S800-AUX is an auxiliary switch that provides additional electrical contacts for monitoring, signaling and control alongside an S800 series circuit breaker. It enables remote status feedback and interlocking without affecting the main breaker's tripping performance, simplifying automation integration.
Which contact configurations are available on the S800-AUX?
The S800-AUX offers normally open (NO) and normally closed (NC) contact arrangements to match different control logic needs. Choosing the correct configuration ensures reliable status reporting and reduces need for extra relays, improving wiring simplicity and diagnostic clarity.
Is the S800-AUX compatible with all ABB S800 breakers?
The S800-AUX is designed for integration with ABB S800 series circuit breakers, matching their mechanical and electrical interfaces. Compatibility is generally ensured for S800 models, but you should verify the accessory variant fits the specific breaker frame and mounting points before installation.
How is the S800-AUX mounted on an S800 breaker?
The unit mounts directly to the S800 breaker using the designated accessory mounting points for a compact fit, typically requiring only a few mechanical fasteners or a clip. This approach preserves the breaker's original function while keeping installation quick and repeatable.
What voltage and current ranges does the S800-AUX support?
The S800-AUX is available in variants suited to common control voltages and low switching currents used for signaling and interlocking. Select the accessory variant that matches your control-voltage and load-current requirements to ensure reliable operation and avoid contact overstress.
Can the S800-AUX be used in motor control circuits?
Yes, the S800-AUX is suitable for motor control applications as a status or interlock contact, providing feedback on breaker position or tripping. It is not intended to interrupt full motor load currents, so use it for control and signaling rather than primary power switching.
How should I wire the S800-AUX to my control system?
Wire the NO or NC contacts into the control input or relay coil circuit according to your control logic, using appropriate conductor sizes and secure terminations. De-energize circuits before wiring, avoid long unshielded runs when possible, and protect contacts from inductive spikes where necessary.
What environmental conditions can the S800-AUX handle?
The S800-AUX is built for industrial use and tolerates typical factory ambient ranges, vibration and routine electrical conditions. For demanding environments check the accessory’s specific environmental and enclosure ratings and ensure installation inside suitable housings to prevent corrosion or contamination.
How can I test that the S800-AUX is working correctly?
You can verify operation by observing contact continuity or control-system response when the breaker is toggled between positions, using a low-voltage test circuit or multimeter. Perform tests during scheduled maintenance and avoid applying loads above the contact rating during verification.
What maintenance does the S800-AUX require to remain reliable?
Maintenance is minimal: periodically inspect mechanical attachment and terminal tightness, look for corrosion or contamination, and replace the unit if contacts show wear or intermittent behavior. Always isolate power and follow safe procedures before performing any inspection or replacement work.