Harken BRS104 (78 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to install the Harken analog switch?
To install the Harken analog switch, first ensure the surface is clean and dry. Use stainless steel screws (A4 DIN 7982 or ISO 7050) and secure the device in the chosen location. Apply sealant around the drilled holes but avoid areas near the silicone covering the electrical actuator.
What are the steps for wiring the Harken BRS102 switch?
For the Harken BRS102 switch, wire the cables before installation. Use cables with a cross-sectional area of 0.34–1.5mm² (AWG 22–16). Insert the cables into the housing, crimp them to the terminals, and secure the terminals with screws. Ensure the cables are not bent and the sealant is applied correctly.
What is the purpose of the Harken analog switch?
The Harken analog switch allows the operator to control connected electrical devices using a button that can be pressed with the hand or foot. It is designed for use on boats and includes an electronic system protected by a silicone membrane to ensure durability and safety.
How to operate the switch with a foot?
To operate the switch with a foot, lift the hinged cover to fully expose the silicone membrane. Ensure the cover touches the deck surface when fully opened. This allows for easy and safe activation of the connected device.
What safety precautions should be taken when using the switch?
Always read and follow all warnings and general instructions provided in the Harken catalog and website. Before use, check the device's functionality and ensure the buttons are intact. Avoid accidental activation and keep all people and objects away from moving parts to prevent injury or damage.
What should be done if the switch is damaged?
If the switch is damaged, do not attempt to repair or replace it with non-original parts. Contact Harken's authorized service or dealer for assistance. Using non-original components voids the warranty and may cause malfunctions or safety hazards.
How to prepare the installation surface?
Before installing the switch, clean and degrease the surface thoroughly with isopropyl alcohol. Allow the surface to dry completely (about 2–3 minutes) before proceeding with the installation to ensure proper adhesion and sealing.
What type of screws are required for installation?
Use stainless steel screws (A4 DIN 7982 or ISO 7050) for installation. The length of the screws depends on the deck thickness. For Harken BRS102, use 3 self-tapping screws with a 4mm diameter and a flat head. For Harken BRS104, use 4 self-tapping screws with a 3mm diameter.
What is the function of the silicone membrane in the switch?
The silicone membrane in the Harken switch protects the internal electronic system from environmental factors. It ensures the device remains isolated from external elements, enhancing durability and preventing water or dust ingress.
What should be done if the switch is not working properly?
If the switch is not functioning correctly, check the wiring and connections. Ensure the cables are properly crimped and sealed. If the issue persists, contact Harken's authorized service for further assistance to avoid potential safety risks or equipment damage.