Philips 28GR5701 (66 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the power supply voltage for this television?
The television requires a power supply of 220-240 volts with a tolerance of ±10% and operates at 50 Hz with a tolerance of ±5%. This ensures stable operation under standard electrical conditions.
What is the minimum antenna voltage for VHF signals?
The minimum required antenna voltage for VHF (Very High Frequency) signals is 30 microvolts. Ensuring this level helps maintain clear reception of these channels.
How to adjust horizontal synchronization on the main board?
To set horizontal synchronization, connect pins 5 and 9 of IC7470 together. Apply an antenna signal and tune the receiver until the image is properly aligned. Use potentiometer 3457 for fine-tuning.
How to adjust vertical centering on the main board?
Vertical centering can be adjusted using switch 7504. This ensures that the picture appears correctly centered vertically, improving overall display quality.
What is the procedure for adjusting focus in the television?
Focus adjustment should be performed on the line output transformer using its built-in potentiometer. Proper focusing enhances image clarity and sharpness by compensating for any distortion caused by the electron beam.
How to set up the AFC (Automatic Frequency Control) circuit?
Connect a signal generator, such as PM 5326, with its frequency adjusted to 38.9 MHz. Use an oscilloscope connected to pin 15 of IC7020 and adjust potentiometer 5034 until the voltage stabilizes at 2.5 volts DC.
What is required for SECAM signal demodulation?
To set up the SECAM demodulator, connect a SECAM black bar signal (e.g., PM5518-TX) and use an oscilloscope to monitor pins 11 and 12 of IC7315. Adjust potentiometers 5321 and 3321 until the minimum modulation is achieved.
How to adjust the video demodulator for optimal performance?
Connect a signal generator (e.g., PM5326) with its frequency set at 38.9 MHz, modulate it with a 1 kHz amplitude signal, and use an oscilloscope connected to pin 22 of IC7020. Adjust potentiometer 5035 until the demodulated output is clear and undistorted.
What are the key settings for stereo audio on this television?
Stereo audio requires setting up both the left and right channels using a signal generator (e.g., PM5515) with two modulating signals. Adjust potentiometers 5182, 5183, and others to ensure balanced output and minimal interference for high-quality stereo sound.
How should the NICAM audio module be configured?
For proper configuration of the NICAM audio module, connect a signal generator (e.g., PM5515) with two modulating signals. Use an oscilloscope to monitor pin 4 and 5 of IC7070 for accurate amplitude settings on potentiometers 5075 and 5085.
Related products from Philips
49PUS7150
User manual 127 pages
49PUS7150
User manual 127 pages
5500 Serie
User manual 570 pages
25CE5270
User manual 17 pages
25CE5571
User manual 17 pages
28CE5290
User manual 17 pages
28CE5591
User manual 17 pages
28CE5590
User manual 17 pages
25CE5570
User manual 17 pages
25CE5575
User manual 17 pages
4400 Serie
User manual 570 pages
257E7
User manual 38 pages
26PF8946/12
User manual 216 pages
274E5
User manual 44 pages
234E5
User manual 44 pages
220S4L
User manual 47 pages
15PT2966
User manual 54 pages
21PT5420
User manual 54 pages
25PT5107
User manual 54 pages
29PT5306
User manual 54 pages