3M 745 (28 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the resistance range of the 745 Wrist Strap Tester?
The 745 Wrist Strap Tester has a fixed internal resistance range from 750 kΩ to 10 MΩ. If the wrist strap falls within this range, the green LED will light up.
How do I test my wrist strap with the 745?
Attach the ground cord of your wrist strap and insert it into the tester's plug-in jack. Press and hold the metal contact plate until an indicator LED lights up to determine if the resistance is within range.
What should I do if the red LED illuminates during testing?
A red indication suggests that the wrist strap or ground cord may be out of specification. Check the ground cord's resistance by disconnecting it from the wrist band and retesting with the tester to determine whether replacement is needed.
How do I install a 9V battery in the 745?
Insert the 9V alkaline battery into the designated compartment. Ensure that the plastic cover is properly placed over the unused plug-in jack before starting any tests.
What are the dimensions of the 745 Wrist Strap Tester?
The base unit measures 158 x 95 x 33 mm (6.25 x 3.75 x 1.25 inches). It weighs approximately 200 grams without a battery.
How do I mount the 745 on the wall?
Use the included 3M 'Dual Lock' adhesive discs and template to secure it at least 1500 mm (6 feet) above the floor. Ensure that the area is clean before pressing the tester firmly against the disc for a secure attachment.
What should I do if the battery LED lights up?
If the 'battery' LED illuminates during testing, it indicates low power and requires immediate replacement of the 9V alkaline battery to ensure accurate results.
How can I verify that my tester is working correctly?
Use a resistance substitution box with values between 750 kΩ and 11 MΩ. Connect it according to the instructions, adjust settings as needed, and check if the LED indicators match expected results.
What should I do if high contact resistance is causing false readings?
High skin or hair resistance on the wrist band can cause a red indication even when everything else is correct. Clean the area thoroughly or replace the wrist strap to resolve this issue.
Can the 745 Wrist Strap Tester be calibrated?
The 745 cannot be manually calibrated, but it can be verified using resistance substitution boxes and test procedures outlined in the manual. This ensures that it is operating within its specified performance range.