Aqua Computer LEAKSHIELD Standalone (75 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is LEAKSHIELD used for?
LEAKSHIELD is a leakage protection system for liquid cooling systems. It actively generates a negative pressure to prevent coolant from escaping in case of a leak, and uses a sensor to detect even minimal leaks.
What happens if a leak occurs?
In the event of a leak, LEAKSHIELD activates an integrated vacuum pump to maintain the required vacuum and only allows air to be drawn into the cooling system, preventing coolant loss.
What coolant is recommended for LEAKSHIELD?
Only coolants from the DP Ultra series are approved for use with LEAKSHIELD. Other coolants may not function properly and could damage the system, especially those with particles or flammable substances.
To install LEAKSHIELD on ULTITUBE reservoirs, hold the glass tube and remove the top lid by turning it anti-clockwise. Screw LEAKSHIELD onto the ULTITUBE, and ensure the display can be rotated to a desired position.
How do you connect the USB cable for LEAKSHIELD?
Connect the USB cable to an internal USB header on your motherboard, ensuring the pin alignment matches your motherboard. Configure the USB port in BIOS to remain active during standby for continuous operation.
What are the main functions of LEAKSHIELD on the device?
LEAKSHIELD allows direct control of key functions via a button on the device. These include mode selection (SHIELD, MONITOR, RELEASE), actions like TEST, FILL, DEAERATION, and LEVEL SENSOR, as well as exiting the menu.
What is the purpose of the aquasuite software?
The aquasuite software is used for configuration and monitoring of LEAKSHIELD. It allows users to manage overview pages, set up sensors, configure alarms, and access detailed data logs and system settings.
How do you create a new overview page in aquasuite?
To create a new overview page, click the plus symbol in the 'Overview pages' section. This allows users to customize and manage data displays for connected devices.
What are the system requirements for LEAKSHIELD?
LEAKSHIELD requires a cooling system with a maximum pump pressure less than 450 mbar, suitable tubing for vacuum, and a reservoir with at least 100 ml of air. It also requires the use of DP Ultra coolant for safe operation.
How do you configure the display settings for LEAKSHIELD?
Display settings for LEAKSHIELD can be configured through the aquasuite software, allowing users to customize pages, set up alerts, and manage data visualization options for real-time monitoring.