Bosch BAT 250 (124 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to connect the battery clamps correctly?
Connect the red clamp (+) to the positive terminal of the vehicle battery and the black clamp (–) to the negative terminal. Ensure proper polarity to avoid damage to the device or the vehicle's electrical system.
What happens if the battery clamps are reversed?
If the clamps are reversed, the LED 7 will blink red, indicating a short circuit or incorrect connection. Immediately turn off the BAT 250 and correct the connection to prevent damage to the device or the vehicle's electrical system.
How to start the vehicle with a faulty or absent battery?
Use the 'Battery Replacement Operation' function. Connect the clamps properly, ensure the LED 7 and 8 are lit in the correct color, and press the 'Battery Replacement Operation' button. The device will provide power to start the vehicle.
What is the maximum starting current provided by BAT 250?
The BAT 250 provides a maximum starting current of 700 Ampere at 12 volts, ensuring reliable engine start even in low temperatures and under various conditions.
How to check the internal battery status of BAT 250?
When you power on the BAT 250, the LEDs 3, 4, and 5 will display the charge status of the internal battery. A green light indicates a fully charged battery, while a yellow light indicates a partially charged battery.
What should I do if the LED 7 is red and LED 8 is yellow?
This indicates no contact with the battery or the vehicle is without a battery. Ensure the clamps are properly connected to the battery terminals and check for any loose connections or damaged clamps.
How to use the support operation mode?
To use the support operation mode, connect the clamps to the battery terminals, press and hold the power button for 2 seconds until the LED 6 turns yellow. This provides power to the vehicle's electrical system without starting the engine.
How to troubleshoot if the LED 7 is red and steady?
This indicates a reversed connection or a clamp that has fallen off during the starting process. Turn off the BAT 250, check the clamp positions, and ensure the clamps are securely connected to the battery terminals.
What is the maximum charging time for the internal battery?
The maximum charging time for the internal battery of BAT 250 is approximately 14 hours when the battery is completely discharged. The device will automatically stop charging once the battery is fully charged.
How to charge the internal battery using the 12V onboard charger cable?
Connect the 12V onboard charger cable to the BAT 250 and the vehicle's 12V electrical system. The device will start charging the internal battery, and the LED indicators will show the charging status.
Related products from Bosch
EasyControl CT 200
User manual 32 pages
EasyControl CT200B
User manual 32 pages
FPE‑8000‑CRP
User manual 4 pages
Climate 5000 VRF
User manual 28 pages
Vivalytic
User manual 8 pages
KTS 200
User manual 158 pages
FRP-O3000
User manual 66 pages
KTS 340
User manual 32 pages
KTS 340
User manual 230 pages
BAT 121
User manual 20 pages
KDAS 0003
User manual 20 pages
DCU 130
User manual 22 pages
DCU 130
User manual 172 pages
FME-420-LSN-TTL
User manual 36 pages
T 12 200 E
User manual 36 pages
LM1-SMB-MK
User manual 44 pages
LM1-SMB-U40
User manual 44 pages
CRIN 848H
User manual 44 pages
CRIN 848H
User manual 380 pages
Denoxtronic 2.2
User manual 48 pages