BRAND PLT unit (257 pages)
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the PLT unit used for?
The PLT unit is a leak testing device designed to check the integrity of air cushion pipettes. It measures the leak rate by assessing the volume loss and can perform both static and dynamic tests to locate leaks.
What are the technical specifications of the PLT unit?
The PLT unit operates on DC 6.5 V, 800 mA. The power supply input is AC 100 V to 240 V, 50/60 Hz, with an output of DC 6.5 V, 800 mA. It is designed for use in environments with temperatures between 15°C and 35°C and relative humidity up to 80%.
What safety precautions should be taken when using the PLT unit?
Ensure the device is used only for leak testing of air cushion pipettes. Avoid using it for liquid suction or in explosive atmospheres. Always wear protective gear, and never apply force to the device. Use only original spare parts and have repairs done by authorized technicians.
The PLT unit should be used in environments with temperatures between 15°C and 35°C, relative humidity up to 80%, and at altitudes up to 2000 meters above sea level. Allow the device to acclimate for 2 hours before testing in a new environment to avoid measurement errors.
How do I prepare the PLT unit for testing?
Before testing, ensure the device is in good working condition. Check the adapter and filter for wear, replace if necessary. Follow the calibration and setup instructions in the manual to ensure accurate results.
What is the leak rate measurement unit for the PLT unit?
The leak rate is measured in hPa ml/s. A leak rate of 1 hPa ml/s at an air pressure of 1000 hPa corresponds to a volume loss of 1 µl/s. This measurement helps assess the integrity of the pipette and detect potential leaks.
What are the environmental compliance standards for the PLT unit?
The PLT unit complies with RoHS 2011/65/EU and other relevant standards for electrical and electronic equipment. It also meets EMC regulations and safety standards such as EN 61010-1:2010 and EN/IEC 62368-1:2014.
What should I do if the PLT unit malfunctions?
If the device shows signs of malfunction, stop the test immediately. Refer to the troubleshooting section in the manual for guidance. If the issue persists, contact the manufacturer or an authorized service center for further assistance.
What are the key components included in the PLT unit package?
The package includes the PLT unit, adapters for testing pipettes with and without a tip, two blind stoppers, three PE replacement filters, a power supply, a quality certificate, and the user manual. All components are essential for proper operation and testing.
Can the PLT unit be used for calibration purposes?
The PLT unit is designed to support daily checks of pipettes to ensure their integrity between calibrations. It is not a substitute for gravimetric testing but helps maintain consistent performance and detect potential leaks early.