Dehn PM 20 (76 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the PM 20 tester used for?
The PM 20 tester is a compact handheld device used to test surge protection devices and components where either the reference voltage at a test current of 1mA or the response voltage is specified. It automatically performs the correct measurement by monitoring the test current.
Can the PM 20 tester be used without a power source?
Yes, the PM 20 tester can be used independently of the power grid or via the included power supply. This allows testing both reference voltage and response voltage on-site according to manufacturer specifications.
What safety precautions should be taken when using the PM 20 tester?
The PM 20 tester must be used only by an electrician familiar with safety regulations. It generates a test voltage that may cause startling reactions, so the test setup must be on an insulating surface and free from foreign equipment. All test devices must be disconnected from the system and not energized.
How does the PM 20 tester display the test results?
The PM 20 tester displays the test voltage in real-time on the LCD screen. When the device responds, it stores the result and displays it as VR (reference voltage) or GA (response voltage), depending on the type of device being tested.
What should be done if the battery is low?
If the display shows 'low BATT', the battery must be replaced or recharged, or the external power supply must be used. The device must be turned off and all connections disconnected before replacing the battery.
How long does a test take with the PM 20 tester?
A test with the PM 20 tester typically takes up to 1.5 seconds, during which the test voltage rises at a rate of 1000V/s until the device responds. The result is then stored and displayed.
What is the maximum test voltage the PM 20 can produce?
The PM 20 tester can produce a maximum test voltage of 1200V DC, with a rise rate of 1000V/s. It can measure voltages up to 1100V, and the test voltage is automatically turned off once the device responds.
What types of surge protection devices can be tested with the PM 20?
The PM 20 can test various surge protection devices such as varistors, Zener diodes, transient voltage suppressors, gas discharge tubes, and spark gaps. It is compatible with specific test adapters like PA BXT and PA DRL.
What should be done if the device is damaged or not working?
If the device shows visible damage or is not functioning, it should be taken out of service and secured against accidental use. This includes situations like long storage under poor conditions or heavy transport damage.
What are the technical specifications of the PM 20?
The PM 20 operates on 8-12V DC with a maximum current draw of 200mA. It uses a 9V alkaline battery and can measure voltages up to 1200V DC. The test voltage rises at 1000V/s, and the device automatically stops when the test object responds.