DHC BT2400 (140 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What battery types does the BT2400 support?
The BT2400 supports various battery types including VRLA/GEL, FLOODED, AGM-FLAT, AGM SPIRAL, and EFB. These options allow for accurate testing of different battery chemistries and applications.
How do I set up the BT2400 for a battery test?
To set up the BT2400 for a battery test, navigate to the main menu and select 'BATTERY TEST'. Enter the VIN number if required, choose the battery type, rating, and capacity. Confirm the setup and proceed to test the battery.
What should I do if the BT2400 detects surface charge?
If the BT2400 detects surface charge, it will prompt you to turn on loads and headlights for 15 seconds to eliminate the charge. If this does not resolve the issue, select 'NO' to skip surface charge detection and continue the test.
What safety precautions should I take when working with lead acid batteries?
When working with lead acid batteries, ensure the area is well ventilated, wear safety glasses and protective clothing, keep water and soap nearby, and avoid smoking or sparks near the battery. Always remove the ground terminal first when disconnecting a battery.
How do I replace the internal batteries in the BT2400?
To replace the internal batteries, unscrew the battery cover and remove the old batteries. For AA alkaline batteries, insert new ones and secure the strap under them. For 18650 lithium batteries, install them in the holder, connect the cable, and ensure the cover is properly closed.
What are the recommended battery options for the BT2400?
The BT2400 supports two battery options: 6 AA alkaline batteries or 2 rechargeable 18650 lithium batteries. It is recommended to use protected type 18650 batteries to prevent overheating, short circuits, or fire risks.
How do I print test results from the BT2400?
To print test results, use the printer icon on the screen. The printer should be rested for at least 1 minute after continuous printing for 2 minutes. Avoid repeatedly printing the same result to prevent overheating and ensure proper cooling before the next print.
What are the battery test result interpretations?
Battery test results include: GOOD & PASS (battery is in good condition), GOOD & RECHARGE (needs charging), CAUTION (may have reduced performance), RECHARGE & RETEST (discharged and needs recharging), BAD & REPLACE (needs replacement), and BAD CELL & REPLACE (has a short circuit and needs replacement).
How do I handle a battery with poor connection to the vehicle?
If the battery has a poor connection to the vehicle, it may affect the charging function. Check the connection, ensure the battery is properly seated, and consider replacing the battery or inspecting the charging system for issues.
What should I do if the BT2400 shows a load error during testing?
If the BT2400 shows a load error, it may be due to a battery larger than 3000 CCA/SAE or improper clamp connections. Fully charge the battery and retest after ensuring the clamps are properly connected. If the issue persists, replace the battery.