LaserLiner TwinFinder (92 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to insert the battery?
Open the battery compartment on the back of the device and insert a 9V battery. Ensure the correct polarity is observed. Refer to the illustration provided for guidance.
How to turn on the device?
Press the ON/OFF button to power the device. The AutoShutOff feature will turn it off approximately 2 minutes after the last measurement.
How to select the measurement mode?
Use the Mode button to select either METAL-Scan or AC-Scan. The mode indicator will display the selected mode, and the AC voltage warning remains active for safety.
How to calibrate the device for metal detection?
Hold the device in the air, away from any metal objects, and press the CAL button. Wait until calibration is complete. This ensures maximum sensitivity for detecting metal objects.
How to detect metal objects?
Place the device against the wall and slowly move it across the surface. The device will detect metal objects such as reinforcing steel, heating pipes, and water lines hidden under plaster or wood panels.
How to adjust sensitivity for better detection?
Calibrate the device on the surface and press the CAL button when the maximum indicator lights up as you approach the object. Move the device closer and repeat until the object is sufficiently localized.
How to detect live electrical wires?
Hold the device in the air, away from live conductors, and select the AC-Scan mode. The device will detect live wires hidden under plaster or wood panels, but it cannot detect wires in dry walls with metal studs.
What should I do if interference occurs during scanning?
Keep your free hand and other objects at least 15 cm away from the device to avoid interference. If static charges cause interference, place your free hand on the wall to discharge the static.
What is the maximum detection depth for metal?
The device can detect copper up to 7.5 cm, iron up to 5 cm, and live conductors up to 4 cm. These depths are based on the device's sensitivity and the material being scanned.
What are the operating and storage temperatures?
The device operates between 0°C and 40°C (32°F to 104°F) and can be stored between -20°C and 70°C (-4°F to 158°F). Ensure the device is kept within these ranges for optimal performance.