Würth BEEPER PLUS (77 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum protection against external voltage?
The Beeper Plus is protected against external voltage up to 300 V for a maximum of 30 seconds.
How long does the LED flashlight last?
The high-power LED flashlight provides illumination for up to 80 hours, with an LED lifespan exceeding 100,000 hours.
What are the technical specifications of the Beeper Plus?
The Beeper Plus has an optical continuity test range of 0 to 20 Ohm, an acoustic continuity test range of 0 to 250 Ohm, a maximum input voltage of 300 V, and is powered by three AA batteries. It has an IP20 protection rating and is rated for CAT II 300 V overvoltage category.
What should I do if the V~ LED does not light up during testing?
If the V~ LED does not light up, there may still be a voltage present. The device detects active voltages through electric fields generated by the power source. Ensure the device is functioning correctly by testing it at a known power source within its rated voltage range.
Can I use the Beeper Plus for non-contact voltage testing?
Yes, the Beeper Plus can perform non-contact voltage testing using its integrated circuit. It detects live lines without requiring a current flow, and the metal bow acts as an extended sensor for this purpose.
What should I do before replacing the batteries?
Before replacing the batteries, ensure all measuring leads are disconnected from the device. Always insert the new batteries with the correct polarity to avoid damage to the device.
What safety precautions should I take when using the Beeper Plus?
Always read the safety instructions before using the device. Be cautious with voltages exceeding 30 V, as they can pose an electrical shock risk. Only use the device with proper training and follow all safety procedures to prevent injury.
What are the measurement categories for the Beeper Plus?
The Beeper Plus is rated for measurement categories II, III, and IV. Category II is for circuits connected directly to the low-voltage mains, Category III is for measurements within building installations, and Category IV is for measurements on the source of the low-voltage installation.
How do I perform an optical continuity test?
To perform an optical continuity test, connect the measuring leads and observe the large LED indicator. It will illuminate when the resistance is between 0 and 20 Ohm, with the light intensity decreasing proportionally as resistance increases.
What should I do if the device detects a voltage but the LED does not light up?
If the device detects a voltage but the LED does not light up, it may be due to factors such as shielded wires, thick insulation, or distance from the power source. Ensure the device is functioning correctly by testing it at a known power source within its rated voltage range.