Dostmann Scantemp 490 (2 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What temperature range can the Dostmann Scantemp 490 measure?
The Scantemp 490 is designed to cover a wide range of practical temperatures for industrial and food applications. Exact limits depend on the sensor or probe used; typical devices measure from well below freezing to several hundred degrees Celsius, making them suitable for most process and surface checks.
How accurate is the temperature reading of the Scantemp 490?
The Scantemp 490 delivers high repeatability and good accuracy for handheld thermometers. Accuracy depends on measurement conditions, emissivity settings and probe type; under stable conditions you can expect professional-level tolerances, but periodic verification or calibration is recommended to maintain best performance.
How do I perform a non-contact temperature measurement with the Scantemp 490?
Aim the Scantemp 490 at the surface you want to measure, ensure the area fills the device’s measurement spot, press the trigger and read the displayed value. Keep the device steady and allow a short settling time for the sensor to stabilise before recording the temperature.
Can the Scantemp 490 measure temperature through glass or plastic?
No, infrared measurements from the Scantemp 490 cannot reliably pass through transparent barriers such as glass or plastic. These materials distort or block infrared radiation, so measure directly on exposed surfaces or use a contact probe for behind-barrier temperature checks.
Which probe types or accessories are compatible with the Scantemp 490?
The Scantemp 490 typically supports integrated infrared measurement and may accept external contact probes such as surface and insertion probes depending on model options. Common compatible accessories include penetration probes, surface probes and protective holsters for industrial environments.
What is the typical response time for measurements with the Scantemp 490?
Response time varies by measurement mode: the infrared sensor provides near-instant readings within a second or two, while contact probes may need a few seconds longer to reach thermal equilibrium. Faster response is achieved on well-conductive surfaces with low thermal mass.
How should I clean and maintain the Scantemp 490 for long-term use?
Keep the instrument and its optics or probe clean using a soft cloth and mild detergent. Avoid abrasive cleaners and protect the sensor from impacts and moisture. Regular inspection of connectors, batteries and housings will extend service life and maintain measurement reliability.
How can I check or recalibrate the Scantemp 490 to ensure correct readings?
Verification can be done by comparing readings against a known reference such as an ice bath for 0°C or a calibrated reference thermometer. For traceable accuracy, periodic professional calibration services are recommended according to your quality procedures and usage frequency.
What power source does the Scantemp 490 use and how long does the battery last?
The Scantemp 490 operates on a replaceable battery type common to handheld instruments, with battery life depending on usage, display backlight and measurement frequency. Typical handheld use offers many hours to months of operation, with an auto-off feature to conserve power between measurements.
Is the Scantemp 490 suitable for food-industry temperature checks and HACCP monitoring?
The Scantemp 490 can be used for food-industry spot checks when fitted with appropriate probes and cleaned between uses. For HACCP compliance, follow your facility’s hygiene procedures and validation requirements; consider dedicated food-grade probes and documented verification routines.