Danfoss RT 8 (6 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How does the Danfoss RT 8 thermostat work?
The Danfoss RT 8 uses a mechanical capillary sensor that senses ambient temperature and mechanically actuates an internal switch when the setpoint is reached. This simple, electronic-free design provides stable long-term operation, reduces failure modes, and saves energy by reliably cycling heating or cooling equipment; mount it away from drafts and direct heat sources for best performance.
What temperature range does the RT 8 support?
The RT 8 typically operates within a range from about -10°C to 30°C, making it suitable for common heating and cooling applications. This operating span covers most residential and light industrial needs; avoid using it outside that range to prevent sensor damage and to ensure accurate switching.
Is the RT 8 suitable for residential and industrial applications?
Yes, the RT 8 is built from durable materials and has a compact mechanical design suited for both residential and many industrial environments. Its robustness and lack of electronics mean less maintenance and reliable service, but verify environmental conditions such as humidity, vibration, and chemical exposure before industrial installation.
Does the RT 8 require electrical power or batteries to operate?
No, the RT 8 operates mechanically and does not require electrical power or batteries to sense temperature, only power for the load it switches. This reduces complexity and eliminates battery replacement, though you should ensure the controlled circuit matches the thermostat's switching capacity and voltage rating.
How precise is the temperature control of the RT 8?
The RT 8 provides stable temperature control suitable for on/off regulation; precision depends on installation, ambient gradients, and setpoint adjustment. While not as finely tunable as modern digital thermostats, it offers reliable repeatability; place the sensor where it measures representative air temperature for improved accuracy.
Can I adjust the temperature setpoint while the RT 8 is installed?
Yes, the RT 8 features an accessible dial for on-site setpoint adjustments without disassembly. Adjust gradually and allow the system to stabilize to observe true temperature response; frequent rapid changes can mask actual performance and make calibration difficult.
What routine maintenance does the RT 8 require?
Maintenance needs are minimal: keep the thermostat and capillary clean, inspect the capillary for kinks or corrosion, and check electrical contacts periodically for wear or oxidation. Regular visual inspections and occasional functional checks will prolong life and prevent false switching.
What mounting and space requirements should I consider for the RT 8?
The RT 8 has a compact form factor for wall or equipment mounting, but the capillary must be routed without sharp bends and secured to prevent damage. Allow enough clearance to access the dial and wiring; avoid mounting near heat-emitting equipment or direct sunlight to prevent measurement errors.
Is the RT 8 compatible with modern HVAC control systems?
The RT 8 is compatible with systems that accept on/off mechanical thermostat contacts, such as boilers, pumps, and simple zone controls. It is not a direct replacement for electronic modulating controls; where needed, use suitable relays or contactors and verify switching ratings to match system requirements.
What should I check if the RT 8 does not switch at the set temperature?
If it fails to switch, check that the capillary and sensor are correctly positioned, the dial is set properly, wiring and contacts are intact, and the switch is not mechanically seized. Test continuity and inspect for physical damage; replace the thermostat if the capillary is kinked or the internal contact shows significant wear.
Related products from Danfoss
088U2128
User manual 2 pages
EKC 100
User manual 2 pages
FTC
User manual 2 pages
VICUO15H
User manual 2 pages
Icon2
User manual 2 pages
Icon2
User manual 2 pages
Icon2
User manual 2 pages
Icon2
User manual 2 pages
Icon2 24V RT
User manual 2 pages
Icon2 24V RT
User manual 2 pages
Icon2 RT
User manual 2 pages
Living Eco
User manual 2 pages
MBC 8000
User manual 2 pages
MBC 8000
User manual 2 pages
MBC 8000
User manual 2 pages
MBC 8000
User manual 2 pages
MBC 8100
User manual 2 pages
MBC 8100
User manual 2 pages
MBC 8100
User manual 2 pages
MBC 8100
User manual 2 pages