Log in


or


google Continue with Google

Already have an account?

Bostitch Cpack30 (6 pages)

0 out of 5
0 review

Tags

Loading...

Languages available:

No exact matches found. Please change your query

PDF page 1
Loading...
Need help?

Need help?

Do you have a question about the product that is not answered in the manual?

  • Receive updates on solutions
  • Get answers to your question

Ask a question

Select image (Optional)

Product description:

The Bostitch Cpack30 is a portable air compressor designed for pneumatic tool applications in construction and DIY projects. It features a 30-gallon vertical tank for extended runtime, delivering reliable air pressure up to 135 PSI with a 1.6 HP induction motor for consistent performance. The oil-free pump minimizes maintenance and ensures durability, while the unit includes a quick-connect coupler and pressure gauge for efficient tool operation. Weighing approximately 85 pounds, it has a steel frame with wheels and a handle for easy mobility. Safety features include thermal overload protection to prevent overheating during prolonged use. This compressor supports tasks like nailing, stapling, and inflation with a CFM rating of 3.7 at 90 PSI.

Frequently Asked Questions

What is the maximum pressure and CFM output of the Bostitch Cpack30?

The Cpack30 delivers up to 135 PSI and a rated 3.7 CFM at 90 PSI. This balance of pressure and flow suits many framing and finishing tools; for best results match tool CFM to the compressor and avoid sustained flows above the rating.

Which pneumatic tools can the Cpack30 reliably power on a jobsite?

The Cpack30 is suitable for framing nailers, staplers, brad and finish nailers, small impact wrenches, and inflation tasks. It best supports intermittent-use tools rather than high continuous-demand equipment, so pair it with tools whose CFM fits below 3.7 CFM at 90 PSI.

How does the oil-free pump affect maintenance and long-term use?

The oil-free pump reduces routine oil changes and contamination risk, lowering maintenance effort. While it requires less service, you should still check valves and drains regularly and monitor performance to ensure long-term durability under frequent jobsite use.

Is the Cpack30 portable enough to move around a construction site?

Weighing approximately 85 pounds with a steel frame, wheels and a handle, the Cpack30 is portable for jobsite use. Use the wheels for rolling across flat surfaces and two-person lifts for stairs or rough terrain to avoid damage or injury.

How long will the 30-gallon tank run when nailing at 90 PSI?

Runtime depends on nailer duty cycle; with 3.7 CFM at 90 PSI and a 30-gallon tank, expect extended intermittent operation measured in minutes to hours. To maximize runtime, set the correct PSI, limit tool continuous draw, and allow the pump to recover between bursts.

What safety features protect the compressor during prolonged operation?

The unit includes thermal overload protection to prevent motor overheating, a pressure relief system and a gauge to monitor output. Follow recommended duty cycles and allow cooling periods; these measures prolong motor life and prevent unsafe overheating.

Can the Cpack30 operate on standard jobsite power and what motor does it use?

The Cpack30 uses a 1.6 HP induction motor compatible with typical 120V jobsite outlets in most regions. Induction motors provide steady performance and require less maintenance, but verify local voltage and circuit capacity before operation to avoid tripping breakers.

How do I reduce moisture and prevent corrosion inside the tank?

To limit moisture, regularly drain the tank via the drain valve after each use and run cycles, especially in humid conditions. Using an inline water separator and storing the compressor in a dry environment further reduces internal corrosion and extends tank life.

What accessories are included and which additional fittings are recommended?

The compressor includes a quick-connect coupler and pressure gauge for convenient tool hookup. We recommend adding a regulator with filter, an inline moisture trap, and quality PU or rubber hose rated for the working pressure to optimize tool performance and safety.

How should I store and care for the compressor between projects?

Store the compressor upright in a dry, ventilated area, drain the tank before long-term storage, and cover it to prevent dust. Periodically inspect hoses, fittings, and the pump for wear, and run the unit occasionally to keep seals conditioned and electrical components functioning.

Send answer

Your opinion matters to us

Do you think we can improve or add something? Are there features missing or do you have suggestions for improvement? We would love to hear from you.

Give a rating

5 out of 5