Ferm FDCS-185L (76 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum cutting depth at 90 degrees?
The maximum cutting depth at 90 degrees is 65 mm. This ensures safe and efficient operation when cutting straight through materials.
How do you set the cutting depth?
To set the cutting depth, loosen the clamping knob, lower the soleplate, and adjust the depth so that the blade is fully exposed. Tighten the knob once the correct depth is achieved.
What safety precautions should be taken when using the circular saw?
Always wear ear and eye protection, and a dust mask. Keep hands away from the blade, secure the workpiece, and never look directly into the laser beam. Avoid using dull or damaged blades and ensure the blade guard moves freely.
What is the power rating of the circular saw?
The circular saw has a power rating of 1200 W, which provides sufficient power for cutting through various materials while maintaining control and safety.
How do you adjust the sawing angle?
To adjust the sawing angle, loosen both knobs, rotate the soleplate to the desired angle, and tighten the knobs. The angle can be read directly from the protractor.
What is the noise level of the circular saw?
The circular saw produces a sound pressure level of 93.5+3 dB(A) and a sound power level of 104.5+3 dB(A). Hearing protection is recommended when operating the saw.
How do you replace the carbon brushes?
To replace the carbon brushes, remove the screws, take out the old brushes, inspect for wear, and insert new brushes. Ensure the copper contacts are properly aligned and secure the brushes firmly.
What is the warranty coverage for this product?
The warranty conditions are detailed on the separately enclosed warranty card. It covers defects in materials and workmanship under proper use and maintenance.
How do you clean the machine?
Keep the ventilation slots clean to prevent overheating. Use a soft cloth to wipe the housing regularly, and avoid using solvents that may damage the plastic components.
What should you do if the blade becomes stuck?
If the blade becomes stuck, stop the saw immediately and do not attempt to remove it while in motion. Investigate the cause, such as blade dullness or incorrect depth settings, and take corrective action.
Related products from Ferm
FFZ-400R
User manual 68 pages
FFZ-400N
User manual 22 pages
KZ-210
User manual 22 pages
FKZ-250
User manual 24 pages
FKS-180
User manual 24 pages
FJS-600LN
User manual 28 pages
FPJS-1800
User manual 30 pages
JSM1020
User manual 30 pages
KS-160
User manual 34 pages
FOS-500
User manual 34 pages
AM-355
User manual 34 pages
FZT-250EN
User manual 38 pages
TSM1012
User manual 38 pages
DHM-1100
User manual 40 pages
DHM-900
User manual 40 pages
FCT-400F
User manual 40 pages
FAM-355N
User manual 42 pages
TSM1008
User manual 44 pages
CSM1022
User manual 52 pages
FPRS-1800
User manual 52 pages