Ferm FKZ-210 (72 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum cutting capacity for a 45° mitre and 0° bevel?
The maximum cutting capacity for a 45° mitre and 0° bevel is 50x80 mm. This ensures the saw can handle various wood and light metal materials efficiently.
How do you set the mitre angle?
To set the mitre angle, loosen the locking knob, adjust the saw table to the desired position, and then tighten the locking knob. The scale on the machine provides the exact angle measurement.
What safety precautions should be taken when using the mitre saw?
Always wear eye and ear protection, ensure the workpiece is securely clamped, keep hands away from the blade, and never operate the saw without the guard in place. Additionally, ensure the machine is unplugged before making any adjustments.
What is the voltage requirement for the mitre saw?
The mitre saw requires a voltage of 230 V to operate. Ensure the power source meets this requirement to avoid damage to the machine or electrical hazards.
How do you replace the carbon brushes?
To replace the carbon brushes, first ensure the plug is not in the socket. Remove the covers with a flat bladed screwdriver, take out the old brushes, and install new ones. Always replace both brushes at the same time to maintain proper function.
What should you do if the motor does not start?
If the motor does not start, check that the plug is securely in the socket, the power cord is intact, and the switch is functioning. If the issue persists, contact a qualified technician or your Ferm dealer for repair.
How do you secure the machine during transport?
Before all work on the machine, pull the mains plug. Ensure all locks and tensioning devices are secure by following the specific steps for locking the slide function and securing the saw head.
What is the weight of the mitre saw?
The mitre saw weighs 5.62 kg, making it suitable for use in various work environments while maintaining stability and control during operation.
How do you clean the machine?
Regularly clean the device’s casing with a soft cloth, preferably after each use. Keep the fan slits free of dust and dirt. For stubborn dirt, use a soft cloth dampened with soapy water. Avoid using solvents that may damage the plastic parts.
What should you do if the saw blade becomes clogged?
If the saw blade becomes clogged with resin or sawdust, stop the machine and clean the blade. Ensure the blade is sharp and properly aligned before resuming use to prevent damage and ensure safe operation.
Related products from Ferm
FFZ-400R
User manual 68 pages
FFZ-400N
User manual 22 pages
KZ-210
User manual 22 pages
FKZ-250
User manual 24 pages
FKS-180
User manual 24 pages
FJS-600LN
User manual 28 pages
FPJS-1800
User manual 30 pages
JSM1020
User manual 30 pages
KS-160
User manual 34 pages
FOS-500
User manual 34 pages
AM-355
User manual 34 pages
FZT-250EN
User manual 38 pages
TSM1012
User manual 38 pages
DHM-1100
User manual 40 pages
DHM-900
User manual 40 pages
FCT-400F
User manual 40 pages
FAM-355N
User manual 42 pages
TSM1008
User manual 44 pages
CSM1022
User manual 52 pages
FPRS-1800
User manual 52 pages