Ferm MSM1030 (72 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum cutting capacity for a 45° mitre and 0° bevel?
The maximum cutting capacity for a 45° mitre and 0° bevel is 50x80 mm. This ensures the saw can handle a variety of wood and wood derivative materials efficiently.
What is the voltage requirement for the machine?
The machine requires a voltage of 230 V to operate. Ensure the power supply meets this requirement to avoid damage to the motor and ensure safe operation.
How do you set the mitre angle?
To set the mitre angle, slacken the locking knob, turn the saw table to the required position, and then tighten the locking knob. The mitre angle can be read from the scale provided.
What safety precautions should be taken when using the saw?
Always wear eye and ear protection, ensure the workpiece is securely clamped, and keep your hands away from the blade. Never attempt to saw more than one piece at a time and ensure the blade is sharp and properly aligned.
How do you replace the carbon brushes?
To replace the carbon brushes, first ensure the plug is not in the socket. Remove the covers with a flat bladed screwdriver, take out the old brushes, and install new ones. Always replace both brushes at the same time to maintain balance.
What is the weight of the machine?
The machine weighs 5.62 kg, making it suitable for use in a stationary setup. This weight helps in maintaining stability during operation and reduces the risk of tipping.
How do you secure the saw blade in place?
To secure the saw blade, pull out the locking knob, raise the saw head, and loosen the bracket. Remove the flanges, install the blade ensuring the arrow points in the correct direction, and then tighten all components securely.
What should you do if the motor does not start?
If the motor does not start, check that the plug is in the socket, the power cord is intact, and the switch is functioning. If the issue persists, contact a qualified technician or Ferm dealer for repair.
How do you clean the machine?
Regularly clean the machine's casing with a soft cloth, preferably after each use. Keep the fan slits free of dust and dirt. Use a damp cloth with soapy water for stubborn dirt, and avoid solvents that may damage plastic parts.
What is the sound pressure level of the machine?
The sound pressure level of the machine is 88.7+3 dB(A). This level indicates the noise generated during operation, and appropriate hearing protection should be used to mitigate potential hearing damage.
Related products from Ferm
FFZ-400R
User manual 68 pages
FFZ-400N
User manual 22 pages
KZ-210
User manual 22 pages
FKZ-250
User manual 24 pages
FKS-180
User manual 24 pages
FJS-600LN
User manual 28 pages
FPJS-1800
User manual 30 pages
JSM1020
User manual 30 pages
KS-160
User manual 34 pages
FOS-500
User manual 34 pages
AM-355
User manual 34 pages
FZT-250EN
User manual 38 pages
TSM1012
User manual 38 pages
DHM-1100
User manual 40 pages
DHM-900
User manual 40 pages
FCT-400F
User manual 40 pages
FAM-355N
User manual 42 pages
TSM1008
User manual 44 pages
CSM1022
User manual 52 pages
FPRS-1800
User manual 52 pages