Flex SBG 3908 (80 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum cutting speed of the SBG3908 metal band saw?
The SBG3908 metal band saw offers two cutting speed options: 60 m/min and 80 m/min. These speeds can be selected using the speed selector switch located on the hand grip. The recommended speed depends on the material being cut and its thickness.
How do I adjust the tension of the saw blade?
To adjust the blade tension, loosen the tensioning lever and move the blade guide as close as possible to the workpiece. Then, tighten the tensioning lever. If the blade is too tight, turn the adjustment knob counterclockwise to reduce tension. Always ensure the blade is properly tensioned to prevent slippage or damage.
What is the recommended blade width for the SBG3908?
The SBG3908 is compatible with a blade width of 0.65 mm. This blade width is suitable for cutting through various metals, provided the material is properly secured and the blade is in good condition. Always use a blade that matches the specifications listed in the manual.
How do I change the saw blade on the SBG3908?
To replace the saw blade, first turn off the machine and unplug it. Loosen the tensioning lever and move the blade guide back. Remove the blade guard by unscrewing the four cross-slot screws. Lower the blade tension by turning the adjustment knob counterclockwise. Insert the new blade into the guides and around the idler wheels, ensuring the cutting direction is correct. Adjust the blade tension and secure the guard before resuming operation.
What safety precautions should I take when using the SBG3908?
Always wear personal protective equipment, including safety glasses, hearing protection, and gloves. Keep your hands away from the cutting area while the machine is operating. Ensure the workpiece is securely clamped in the vise. Never hold the workpiece by hand during cutting. Avoid using damaged or dull blades, and inspect the machine and blade for any signs of wear or damage before each use.
What is the noise level of the SBG3908 during operation?
The SBG3908 produces a noise level of 82 dB(A) at idle and 84.3 dB(A) during the working cycle. If the noise level exceeds 85 dB(A), it is recommended to use hearing protection. These values are measured in accordance with CEE89/392 standards.
How do I adjust the cutting angle on the SBG3908?
The cutting angle can be adjusted from 0° to 45° using the angle adjustment knob. Turn the knob clockwise until it clicks into place. Ensure the blade guide is properly aligned with the workpiece and that the blade is not over-tensioned, as this can cause the blade to run off the guides.
What is the recommended cutting depth for the SBG3908?
The SBG3908 is designed for cutting through various metals, with a maximum cutting depth of up to 85 mm. For materials thicker than 85 mm, it is recommended to use a different cutting method or a larger machine. Always ensure the workpiece is securely clamped and the blade is properly tensioned to prevent damage to the blade or the machine.
What is the power consumption of the SBG3908?
The SBG3908 consumes 850 W of power when operating. It is designed to run on a standard 230 V/50 Hz power supply. Ensure the power supply matches the specifications listed on the nameplate to avoid damage to the machine or electrical hazards.
How should I maintain the SBG3908 to ensure optimal performance?
Regular maintenance includes cleaning the machine and removing metal shavings and debris from the cutting area. Inspect the blade and guides for wear or damage before each use. Keep the machine in a dry, well-ventilated area when not in use. Replace any worn or damaged parts promptly to ensure safe and efficient operation.