SCANGRIP 13.0001 (94 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to safely position the jaws?
Always check that the jaws are correctly positioned before use. Ensure the spring is securely held between the jaws and the center line of the spring is aligned with both jaws to prevent damage or injury.
What is the maximum load capacity of the compressor?
The CANVIK CENTER coil spring compressor has a maximum load capacity of 1500 kg (15000 N), which ensures it can handle heavy-duty spring compression tasks safely and effectively.
What safety precautions should be taken when using the compressor?
Always wear personal protective equipment such as gloves and safety glasses. Ensure the vehicle is properly supported with jack stands, and never leave compressed springs unattended. Avoid standing in hazardous positions to prevent injury if the spring releases unexpectedly.
What is the torque limit for the compressor?
The compressor must only be used with the supplied torque stick that provides a 40 Nm torque limit. Exceeding this limit can damage the tool or cause injury, so it is crucial to follow this specification strictly.
What types of springs can the compressor handle?
The CANVIK CENTER is specifically designed for compressing coil springs in Wishbone and Multilink systems. It is not suitable for conical or ball springs, and any other use is considered non-intended and potentially dangerous.
How to properly mount the spring on a car?
Ensure the jaws are correctly positioned and securely mounted. Place the spring compressor in a bench vice, fixate it by clamping the jaw, and release the spring slowly and carefully. Always stand beside the compressor, not in line with the spring axis, to avoid injury.
What should be done if the compressor is damaged?
If the compressor is damaged or shows signs of wear, stop using it immediately and contact the manufacturer for assistance. Do not attempt to repair or disassemble the tool yourself, as this can lead to further damage or safety risks.
How to maintain the compressor?
Store the compressor in a dry place and keep it clean. Grease the guide spindle every six months using graphite grease, and ensure the spindle is clean before greasing. Always keep the unit dry and avoid over-torquing to prevent damage.
What is the recommended storage for the compressor?
Store the compressor in a dry, safe location away from moisture and contaminants. Keep the jaws attached to the compressor during storage to prevent damage and ensure they are ready for use when needed.
What are the standard accessories included with the compressor?
The standard accessories include a torque stick (safety key) with a 40 Nm limit, two jaws for Ø90-120 mm, and two jaws for Ø120-140 mm. These components are essential for safe and effective operation of the compressor.