Stanley 07536 (328 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum air pressure for the tool?
The maximum air pressure for the tool is 7 bar (100 PSI). This pressure should not be exceeded to ensure safe and efficient operation.
What is the pull force of the tool?
The pull force of the tool is 3.89 kN (875 lbf) at an air pressure of 5.5 bar (80 lbf/in²). This force is essential for effectively placing fasteners.
What safety precautions should be taken when using the tool?
Always wear impact-resistant eye protection and hearing protection. Ensure the workpiece is securely fixed and avoid using the tool near people. Check for damaged parts before use and maintain a safe working environment.
How should the tool be connected to the air supply?
Connect the tool to the intensifier and main air supply by pushing the hydraulic hose into the quick release connector on the intensifier. Ensure all pneumatic lines are correctly connected to the control box as specified in the manual.
What is the recommended air hose size for the tool?
The air hoses should have a minimum bore diameter of 6.4 millimetres or 1/4 inch. They should be oil-resistant, abrasion-resistant, and armored where necessary to prevent damage.
How do you load the tool with a mandrel?
To load the tool, insert an empty mandrel fully into the tool, close the tail jaws using the switch, and allow the cursor to pop out. Then, open the tail jaws to release the mandrel and insert the cursor into the barrel.
What are the noise levels associated with the tool?
The A-weighted sound power level is 79.5 dB(A), and the A-weighted emission sound pressure level at the workstation is 68.5 dB(A). These levels are determined according to ISO 15744 and ISO 3744 standards.
What is the vibration level of the tool?
The vibration emission level for the tool is 0.97 m/s², determined according to ISO 20643 and ISO 5349 standards. This level is declared in accordance with EN 12096.
What should be done if the tool is damaged?
If the tool is damaged, it should not be used until it has been serviced by trained personnel. Check for misalignment, binding, or broken parts before use and ensure all safety instructions are followed.
What is the recommended oil type for the tool?
Use only clean oil and recommended hydraulic fluids. The maximum temperature of the hydraulic fluid at the inlet is 100°C (212°F). Always use the unit handle when moving the intensifier unit and avoid dropping heavy objects on the hoses.
Related products from Stanley
STHT77616
User manual 280 pages
NB08PT-18
User manual 248 pages
NB08PT-18
User manual 468 pages
FatMax FME650
User manual 84 pages
FatMax FME650
User manual 96 pages
Fatmax SFMCF930B
User manual 84 pages
Fatmax FME380
User manual 96 pages
FATMAX FMC710
User manual 108 pages
Fatmax FMEG225VS
User manual 120 pages
Fatmax FMEG225VS
User manual 132 pages
FATMAX SFMCN616B
User manual 124 pages
FATMAX SFMCN616D2K
User manual 124 pages
74290
User manual 268 pages
ESAFOR MK II
User manual 268 pages
PB2500Smart
User manual 468 pages