Tyrolit DME17DP (99 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What safety precautions should be taken when using the machine?
Ensure the work area is clean and well-lit to prevent accidents. Avoid using the machine in explosive environments with flammable materials. Keep children and others away during operation. Use personal protective equipment, including safety glasses and ear protection. Always check for damaged cables and avoid contact with grounded surfaces to reduce the risk of electric shock.
How should the machine be connected to power?
Use a properly grounded socket and never modify the plug. Avoid using extension cords unless they are suitable for outdoor use. If working in a wet environment, use a residual current device (RCD) to minimize the risk of electric shock. Ensure the machine is disconnected before making any adjustments or replacing parts.
What are the technical specifications of the DME17DP model?
The DME17DP operates at 230V, consumes 9.3A, has a rated power of 2000W, and delivers 1340W. It has a frequency range of 50-60Hz and can run at 700 or 1700 RPM. The impact frequency is 14000 or 34000 per minute, and the impact energy is 0.4 or 0.1 Joules. It is suitable for drilling in concrete with a diameter range of 30-150mm.
What is the noise and vibration level of the machine?
The machine emits a typical A-weighted sound pressure level of 88 dB(A) and a sound power level of 99 dB(A). The vibration levels are 5 m/s² for drilling in concrete and 8 m/s² for impact drilling. These values are measured according to EN 60745-2-1 standards and are used for comparing electric tools.
How should the diamond drill bit be installed?
Use a 1 1/4" UNC thread for the drill bit and ensure it is properly aligned with the drill rod. Apply a small amount of waterproof grease to the thread to allow easy removal. Check that the diamond segments extend sufficiently on both the inner and outer diameter. Use the correct socket wrench and avoid using a hammer to loosen the drill bit.
What is the recommended procedure for dry drilling?
Attach the dust extraction hose to the machine and ensure a powerful dust collector is used to prevent clogging. Use appropriate centering spikes for accurate drilling. Maintain a clean and dry material to avoid blockages. Always use a dust extraction system to ensure a dust-free working environment.
How should the machine be maintained?
Always disconnect the power before performing maintenance or repairs. Clean the machine with a dry or damp cloth, and ensure the ventilation slots remain open and free of debris. Replace or repair damaged cables and plugs only in an authorized service center. Check the gear oil after 100 hours of operation and replace it if necessary.
What is the warranty period for the machine?
TYROLIT provides a 12-month warranty from the date of delivery, covering material and manufacturing defects. This warranty does not apply to normal wear and tear, overloading, or damage caused by unauthorized modifications or the use of non-original parts.
What is the compliance declaration for the machine?
The machine complies with the following standards: EN60745-1, EN60745-2-1, EN55014-1, EN55014-2, EN61000-3-2, and EN61000-3-3. It also meets the requirements of the following directives: 2006/42/EC, 2014/30/EU, and 2011/65/EU.
How should the machine be disposed of at the end of its life?
Dispose of the machine in accordance with the WEEE Directive 2002/96/EC. Return old equipment to authorized collection points or our representatives abroad to ensure proper recycling and separation of materials. Do not dispose of the machine in unsorted municipal waste.