3M C2167PW (332 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I clean the touch sensor?
To clean the touch sensor, turn off the display and use a soft, lint-free cloth dampened with a 50:50 solution of isopropyl alcohol and water. Avoid gritty cloths and ensure the cleaner is applied to the cloth, not the sensor, to prevent damage.
What are the display dimensions for the C2167PW?
The C2167PW display has specific dimensions for mounting, which are detailed in the manual. Ensure you use the provided side brackets and screws for secure installation.
How do I connect the display to my computer?
Connect the D-SUB VGA cable from the display's VGA input to your computer's D-SUB port, and the DVI cable from the display's DVI input to your computer's DVI port. Also, connect the USB cable from the display to your computer's USB port.
What video modes are supported by the display?
The display supports various video modes including 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, and 1920 x 1080. Each mode has specific refresh rates, such as 60 Hz or 75 Hz, which should be configured to ensure optimal performance.
How do I adjust the display settings?
After connecting the display, configure your graphics card to use a resolution less than or equal to 1920 x 1080 with a refresh rate of 60 Hz and a color depth of at least 16-bit. This ensures compatibility and optimal display performance.
How do I access the on-screen display (OSD) menu?
Press the MENU button to access the OSD menu. Use the UP and DOWN buttons to navigate through the options, and the SELECT button to choose settings such as brightness, contrast, and image position.
What should I do if I see condensation on the display?
Condensation between the touch screen and display may occur in extreme temperature and humidity conditions. Place the unit in its intended location for 24 hours to allow environmental stabilization before powering it on. This minimizes condensation and ensures safe operation.
How do I power on the display?
Ensure all equipment is turned off, then connect the DC adapter to the power connector on the monitor and plug the other end into an electrical outlet. Once connected, power on the display and test your setup.
What should I do if the display is not working properly?
Refer to the troubleshooting section of the manual for error messages and solutions. Ensure all cables are securely connected, the display settings are correct, and the environment is suitable for operation.
How do I adjust the brightness and contrast?
Use the OSD menu to adjust brightness and contrast. Navigate to the relevant settings using the UP and DOWN buttons, and press SELECT to make adjustments. Ensure the display is in a normal lighting condition for accurate calibration.