Milltronics MultiRanger 200 (117 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What are the power requirements for the MultiRanger?
The MultiRanger has two power options: AC and DC. The AC version requires 100-230 V AC ± 15%, 50/60 Hz, with a 250V, 0.375A fuse. The DC version needs 12-30 V DC, 20W, with a 250V, 2A fuse.
What is the maximum operating altitude for the MultiRanger?
The MultiRanger can operate at an altitude of up to 2000 meters. It is designed to function within ambient temperatures ranging from -20 to 50 °C.
What are the output options for the MultiRanger?
The MultiRanger provides multiple output options including mA analog outputs (0-20 mA, 4-20 mA), control relays (2 or 4 Form A, NO), alarm/relay outputs (1 or 2 Form C, NO or NC), and communication interfaces (RS-232 and RS-485).
What types of transducers are compatible with the MultiRanger?
The MultiRanger is compatible with Echomax series, STH series, and other transducers operating at 44 kHz. It is important to use shielded cables with specific conductor and insulation requirements to ensure proper performance.
How should the MultiRanger be mounted on a wall?
To mount the MultiRanger on a wall, use the provided mounting holes and ensure the unit is securely fastened. The installation requires drilling holes in the mounting surface and using appropriate fasteners to secure the unit in place.
What are the relay specifications for the MultiRanger?
The MultiRanger has relays rated at 5A at 250V AC, non-inductive. The three-relay model includes 2 control relays and 1 alarm relay, while the six-relay model includes 4 control relays and 2 alarm relays. All relays are certified for use with equipment that fails within rated maximums.
What is the recommended torque for terminal clamping screws?
The recommended torque for terminal clamping screws is between 0.56 and 0.79 Nm (5 to 7 in.lbs). It is important not to overtighten the screws to avoid damaging the terminal board.
How should transducer cables be installed?
Transducer cables should be run in a grounded metal conduit, separate from other wiring. Avoid using coaxial cables due to electrical noise interference. Shielded cables should be used, and the shield should not be connected to ground to prevent differential ground potentials.
What are the operating modes of the MultiRanger?
The MultiRanger operates in two modes: PROGRAM and RUN. In PROGRAM mode, parameters can be set to match specific application requirements. In RUN mode, the device functions according to the programmed settings.
How do you change parameters on the MultiRanger?
To change parameters, switch the MultiRanger to PROGRAM mode by pressing the PROGRAM key. Navigate to the desired parameter number, enter the new value, and press ENTER to save the changes. Ensure the unit is in RUN mode after making adjustments.