Futurelight WDS-1 (27 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to connect a DMX-512 controller?
To connect the DMX-512 controller, use a two-conductor shielded cable for the connection between the controller and wireless sender. The XLR connector uses 3-pole connectors and sockets. Ensure that the data cable's wires do not touch each other to prevent malfunction.
What is the maximum number of receivers supported?
The WDS-1 supports up to 8192 wireless receivers in a single W-DMX system, allowing for large-scale installations with multiple DMX universes. This makes it suitable for complex lighting setups.
How do I log out a wireless receiver?
To log out a wireless receiver, press and hold the Function key on the receiver for at least 3 seconds. Once logged out, the red LED will remain lit continuously, indicating that the device is no longer connected to the sender.
The WDS-1 operates with a power supply of 230 V AC, 50 Hz. It uses an internal DC adapter (6–12 V, 1 A). The device supports up to 512 DMX channels and has a wireless range of 1000 meters under line-of-sight conditions.
What should I do if the device won't power on?
If the device does not turn on, check that the power cable is properly connected. Ensure the power unit is plugged in and the main switch is set to 'ON'. If issues persist, consult your local dealer for further assistance.
How do I log out all wireless receivers from the sender?
To log out all wireless receivers, press and hold the Function key on the sender for at least 5 seconds. Once a receiver is logged out, its red LED will remain lit continuously, indicating it has been disconnected.
What are the safety precautions when using this device?
Always keep the device away from heat sources and moisture to prevent damage. Ensure that no cables are left loose or exposed. Do not use the device in environments with high humidity or rain as it may lead to electrical hazards.
What is wireless DMX technology used for?
Wireless DMX allows you to control multiple lighting devices without physical wiring, enabling greater flexibility and reducing installation complexity. It uses frequency-hopping spread spectrum (FHSS) and time-division multiple access (TDMA) technologies.
How do I install a wireless DMX system?
To set up the wireless DMX system: connect your DMX controller to the sender, power on all devices, press and hold the Function key for 3 seconds to log in receivers. Once connected, use the controller to manage lighting effects.
What should I do if there is no signal detected?
If no signal is being received, check that all connections are secure and properly made. Ensure the DMX-512 controller is correctly linked with the sender and receiver devices. If issues persist, refer to the troubleshooting section for further guidance.