Vaisala TMD62 (102 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What are the HMD60 series transmitter models?
The HMD60 series includes two analog output models: HMD62 for measuring both humidity and temperature, and TMD62 for temperature measurements. Both models use 4 ... 20 mA loop powered current output.
What are the default temperature output scales for HMD60?
The default temperature analog output scale for HMD60 is -20 ... +80 °C (-4 ... +176 °F). This range is suitable for most HVAC and industrial applications.
How can I configure the HMD60 transmitter?
Configuration and adjustment can be done using physical trimmers and DIP switches on the transmitter's circuit board, or with Vaisala Insight PC software. The MI70 hand-held indicator can also be used for field adjustments.
What are the installation requirements for the HMD60 transmitter?
Ensure there is a minimum clearance of 5 m (16.5 ft) between the probe and any humidifier. Drill a second hole approximately 30 cm (12 in) from the installation hole for reference measurements. The probe should be installed in the middle of the duct, avoiding dead legs and downward angles.
What tools are needed for installing the HMD60 transmitter?
You will need a medium crosshead screwdriver, small slotted screwdriver, drill with 3.5 mm and 13 ... 15 mm bits, and tools for cutting and stripping wires. Ensure the installation hole is sealed tightly to prevent external air interference.
What are the dimensions of the HMD60 transmitter?
The HMD60 transmitter has dimensions of 299 mm (11.77 in) in length, 101 mm (3.97 in) in height, and 82 mm (3.23 in) in width. These dimensions are suitable for installation in standard ducts.
What are the available humidity output parameters for HMD62?
The HMD62 transmitter offers several humidity output parameters including RH, Td, Tdf, A, X, Tw, and H. These parameters can be selected using DIP switches on the transmitter board.
What is the maximum air flow speed for the HMD60 transmitter?
The maximum air flow speed for the HMD60 transmitter is 50 m/s (with sintered filter). Exceeding this speed may affect measurement accuracy and sensor performance.
How do I access the transmitter's electronics for configuration?
To access the electronics, open the captive screws on the transmitter lid. This allows access to the input and output electronics for configuration and adjustment using physical trimmers, DIP switches, or software.
What is the purpose of the second hole drilled during installation?
The second hole is intended for reference measurements during calibration or adjustment. It should be drilled approximately 30 cm (12 in) from the main installation hole towards the direction of air flow, and can be used for future reference purposes.
Related products from Vaisala
HMD60 Serie
User manual 154 pages
GMW20
User manual 50 pages
DPT145
User manual 88 pages
GMW95RD
User manual 100 pages
HMW95
User manual 100 pages
HMW95D
User manual 100 pages
MHT410
User manual 102 pages
MHT410
User manual 144 pages
HMD62
User manual 102 pages
Indigo 520
User manual 118 pages
Indigo300
User manual 136 pages
HMD65
User manual 154 pages
Indigo520
User manual 174 pages
Indigo520
User manual 176 pages
Indigo510
User manual 176 pages