Clearaudio SMART MATRIX (27 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What voltage does the Smart Matrix operate on?
The Smart Matrix is available for both 230V and 110V power supply. Always check the label near the power connection on the back of the machine to confirm its rated voltage before plugging it in.
How do I install the suction arm?
Insert the suction arm from above into the designated opening on the right front side of the machine. Ensure that the small wave inside the stainless steel hose aligns with the guide slots, then push down until the hose can swivel left.
What should I do if the microfiber cleaning strips are dirty?
Inspect the microfiber strips on the suction arm for dirt or damage. Clean them using a toothbrush and solvent-based liquid. Replace the strips by peeling off the protective film, applying them along the suction slit without sealing it.
How do I clean a vinyl record with the Smart Matrix?
Place the LP on the turntable, secure it with the clamp puck, apply cleaning solution using the brush, and let it spread evenly. Rotate the platter for 1½ to 2 revolutions per direction depending on dirt level, then activate suction to dry.
How often should I empty the collection tank?
Empty the collected liquid from the reservoir after every 15–20 cleaned records. Pull out the hose until you feel resistance, remove the red cap at the end, and let it drain into a container before reattaching the cap.
What should I do if there is excess cleaning solution on the record?
Wipe away any excess liquid with a cloth to prevent dripping onto the housing or label. Ensure that only an even film of fluid remains for effective cleaning without damaging components.
How does the suction function work during operation?
Press the 'VACUUM' switch to activate the suction process, which removes excess liquid and dries the record surface. Make sure the platter is centered before starting the suction cycle for optimal performance.
What safety precautions should I take when using the Smart Matrix?
Always use a grounded outlet, avoid overfilling the collection tank to prevent automatic shutdown, and ensure proper ventilation in your workspace. Do not use abrasive or corrosive cleaning agents that could damage components.
How do I replace the microfiber strips on the suction arm?
Remove the old strip from the hose, clean the surface with a solvent-based liquid, then apply new strips by peeling off their protective film and placing them along the suction slit without sealing it to maintain airflow.
What should I do if there is an unusual noise during operation?
If you hear excessive noise, stop using the machine immediately. Check for blockages in the hose or overfilling of the collection tank. Allow the device to cool down for at least 30 minutes before resuming use.
Related products from Clearaudio
Alpha
User manual 2 pages
Beta
User manual 2 pages
Classic
User manual 2 pages
Virtuoso
User manual 2 pages
Performance DC
User manual 14 pages
MC MOVING COIL
User manual 15 pages
VTA LIFTER
User manual 15 pages
Champion Level 2
User manual 16 pages
Champion Limited
User manual 16 pages
smart power 12V
User manual 16 pages
Avantgarde
User manual 17 pages
Champion Magnum
User manual 18 pages
CONCEPT
User manual 18 pages
CONCEPT
User manual 18 pages
CONCEPT
User manual 24 pages
CONCEPT
User manual 24 pages
CONCEPT
User manual 24 pages
CONCEPT
User manual 24 pages
CONCEPT
User manual 28 pages
concept wood
User manual 18 pages