LENCO LS-600WA (104 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to adjust the stylus down force?
To adjust the stylus down force, locate the counterweight on the tonearm and rotate it until the tonearm balances. The down force scale ring should be aligned with the zero mark. Adjust the counterweight according to the cartridge manufacturer's recommendations, with each mark representing 0.05g of down force. The recommended down force for the factory fitted cartridge is 2.0±0.2g.
How to connect the turntable to a stereo system?
The RCA jacks on the turntable can be used as either Phono or Line outputs, depending on the Phono/Line switch setting. When used as a line output, connect them directly to active speakers or the line input of your stereo system. When used as a Phono output, connect them to a phono pre-amplifier or the phono input of your stereo system. The Red plug connects to the Right channel and the White plug connects to the Left channel.
How to set up the turntable for the first time?
Place the unit on a flat and level surface. Install the turntable lid, remove the tie-wrap holding the tonearm, put the drive belt around the hub, and position the slip mat on the platter. Slide the tonearm counterweight onto the tonearm and adjust it for proper stylus pressure. Locate the anti-skating weight and set it according to the down force.
How to connect the turntable via Bluetooth?
Press and hold the ON/OFF& MODE button for 3 seconds to turn on the power. Select Bluetooth mode by pressing the button again, and the indicator will light in blue. Turn on your audio device's Bluetooth, search for 'Lenco LS-600', and pair. Once paired, you can play and stream music from your device to the turntable.
What are the power specifications of the turntable?
The turntable uses an AC power adaptor with DC output of 15V 2400mA. The power consumption is 36W, and the output power is 2x 30W RMS. The unit operates on a power source as specified on the rating label, and it must be connected to a main socket with a protective earthed connection if it is a class 1 device.
How to replace the cartridge?
Before replacing the cartridge, put the stylus protector back on to prevent damage. Carefully remove the wire leads from the original cartridge, loosen the headshell screws, and remove the old cartridge. Mount the new cartridge, connect the wire leads according to the color codes (White-L+, Blue-L-, Red-R+, Green-R-), and adjust the position to ensure precise alignment with the reference lines.
What is the recommended tracking pressure for the stylus?
The recommended tracking pressure for the stylus is 1.8-2.2g, with 2.0g as the standard. Ensure the counterweight is adjusted to achieve this pressure, and always use the stylus guard when moving or cleaning the turntable to avoid damage.
How to clean the turntable and its components?
Clean the stylus frequently with a soft brush using a back-to-front motion. Use a record cleaning brush and solution to remove dust or grease from records. Wipe the turntable lid and cabinet with a slightly damped microfiber cloth. Avoid using harsh chemicals or solvents, as they may damage the finish.
What should I do if the turntable platter does not turn?
Ensure the unit is in turntable mode by pressing the MODE button, and the indicator should light in red. Press the PLAY/STOP button to start playback. Check that the drive belt is properly installed and not slipped off. If the issue persists, consult the troubleshooting section of the manual.
How to adjust the anti-skating force?
Locate the anti-skating weight and adjust it according to the down force. The anti-skating weight should be placed in the 3rd groove for the factory-fitted cartridge. Adjust the weight so that it hangs freely to the left of the support. The anti-skating force must be set in accordance with the down force to ensure proper tracking.
Related products from LENCO
L 70
User manual 7 pages
TT-13
User manual 70 pages
TT-13BK
User manual 70 pages
LS-10BK
User manual 32 pages
LS-10BK
User manual 57 pages
LS-300WD
User manual 37 pages
LS-300WD
User manual 54 pages
LS-300WD
User manual 67 pages
LS-10WD
User manual 32 pages
LS-10WD
User manual 57 pages
LS-300BK
User manual 37 pages
LS-300BK
User manual 54 pages
LS-300BK
User manual 67 pages
LS-300V2
User manual 54 pages
LS-300V2
User manual 67 pages
Classic Phono TT-10BN
User manual 54 pages
L-400BK
User manual 60 pages
L-400BK
User manual 60 pages
LS-40WD
User manual 62 pages
LS-301BK
User manual 67 pages