Philips FC8710 (122 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What are the model numbers of the robot?
The robot models are FC8715, FC8710, FC8705, and FC8700. These models have similar features and functions but may vary slightly in design or additional features.
How does the robot clean hard floors?
The robot uses a 2-stage cleaning system to efficiently clean hard floors. The two side brushes help remove dirt from the floor and direct it toward the suction opening, while the suction power picks up loose dirt and transports it into the dust container.
What cleaning patterns does the robot use?
In auto cleaning mode, the robot uses four cleaning patterns: Z-pattern or zigzag, random, wall-following, and spot-cleaning. These patterns are used in a fixed sequence to ensure thorough cleaning of the room.
How does the robot avoid height differences?
The robot has three drop-off sensors that detect and avoid height differences such as staircases. It may move slightly over the edge of a height difference, but it is important to clean the sensors regularly to ensure proper detection.
How do I prepare the robot for its first use?
Before first use, unpack the side brushes and place the robot upside down on a table or floor. Attach the side brushes to the shafts on the bottom of the robot until you hear a click, ensuring they are properly secured.
How do I remove the battery protection tag from the remote control?
For FC8715, FC8710, and FC8705 models, pull the battery protection tag out of the battery compartment of the remote control. This allows the remote control to function with the CR2025 coin-shaped battery.
How do I charge the robot on the docking station?
Place the robot on the plugged-in docking station. The start/stop indicator will flash slowly during charging and light up continuously when the battery is fully charged. This indicates the robot is ready to start cleaning.
What does the start/stop button do?
The start/stop button allows you to switch the robot from sleep mode to standby, start or stop cleaning, and power the robot on or off. The robot responds differently depending on how long the button is pressed.
What do the signals on the display mean?
The display has three indicators: warning, start/stop, and dust container full. A continuously lit start/stop indicator means the robot is ready to clean, a slow flash means it is charging, and a quick flash means it is searching for the docking station or has a low battery.
How can I make the robot return to the docking station?
For FC8715, FC8710, and FC8705 models, press the docking button on the remote control to make the robot return to the docking station before the battery runs out. This helps recharge the battery and ensures the robot is ready for the next cleaning session.
Related products from Philips
HomeRun FC9910
User manual 106 pages
HomeRun FC9910
User manual 128 pages
HomeRun FC9910
User manual 262 pages
FC6148
User manual 132 pages
FC6148
User manual 132 pages
FC8250
User manual 76 pages
FC8250
User manual 76 pages
FC8450
User manual 80 pages
FC8768
User manual 58 pages
FC8768
User manual 104 pages
FC9150
User manual 88 pages
FC9160
User manual 76 pages
FC9160
User manual 100 pages
FC9160
User manual 194 pages
FC9160
User manual 198 pages
FC9160
User manual 198 pages
FC9176
User manual 194 pages
FC9176
User manual 198 pages
FC9176
User manual 198 pages
FC6144
User manual 168 pages