Airzone Easyzone AZEZ6DAISL01 (136 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to install Easyzone on the indoor unit?
To install Easyzone on the indoor unit, locate the mounting holes and use a screwdriver to uncover them if necessary. Place the Easyzone at the air outlet and secure it with screws. If your unit has a front with circular adapters, remove the front panel and install the provided adapter. Ensure the connection neck is insulated using 25 mm thick insulation bands.
What is the correct way to connect the air ducts to the Easyzone?
Connect each duct to its corresponding valve. Follow the instructions for proper insulation. Make a cut in the duct to keep the motor outside. Ensure the insulation is correctly applied to prevent condensation and maintain system efficiency.
How to install the VMC air intake on Easyzone?
If your Easyzone has VMC and you want to use this function, remove the elliptical cap fixed with screws. Remove the protective sheet covering the outdoor air intake and refix the elliptical cap. Fold or cut the cap at the bottom of the air intake ports to allow airflow.
How to install a bypass valve on Easyzone?
To install a bypass valve, use a firm tap to remove the pre-cut area on the sides corresponding to the bypass. Use a knife to remove the insulation covering the bypass area and expose the mounting slots. Insert the bypass valve into the slots and turn it left to right until it clicks. Secure the bypass valve to the plenum using a sheet metal screw (Ø3.9mm).
What should I do if I need to disable a valve?
To disable a valve, ensure the valve to be disabled is closed. Disconnect the motor. Insert the sealing cap into the valve. This will prevent airflow through the valve and ensure the system operates correctly without that zone.
How to install a motorized plenum with a blind cap?
Motorized plenums with disabled valves are manufactured and delivered with the disablement already completed. For plenums with 7 valves, the disabled valve is the 8th one, so during initial configuration, ensure that zone 8 is not connected to maintain system integrity.
What are the requirements for installing the system?
Ensure the climate system is installed according to the manufacturer's requirements, complies with local regulations, and functions correctly before installing the Airzone system. Locate and connect all installation components according to the current local electrical regulations.
What type of cable should be used for communication with the system?
For communication with the system, use the Airzone cable: a 4-wire cable (2 x 0.22 mm² twisted and shielded wires for data communication and 2 x 0.5 mm² wires for power). This ensures reliable data transmission and system operation.
What is the recommended location for thermostats?
Place thermostats in locations that are representative of the room's temperature and away from direct sunlight, heat sources, or cold drafts. Ensure the thermostats are installed according to the manufacturer's guidelines to maintain accurate temperature readings and system performance.
What should I do if the system is not working properly?
If the system is not functioning properly, do not attempt to repair it yourself. Contact the sales distributor or service distributor for repair or removal of the product. Ensure the system is disconnected from power before contacting support to avoid electrical hazards.