Thrustmaster T3PA-PRO (205 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I attach the lateral arches?
To attach the lateral arches, place a plastic washer on the lower screw thread of the pedal set, then position the arch on the upper screw thread and washer. Secure using two M8-type Allen screws and a 6 mm Allen key.
What tools are needed to adjust the pedals?
You will need a 2.5 mm Allen key to adjust the height, spacing, and tilt of the pedals. A 2 mm Allen key is also included for specific adjustments.
How many height positions are available for each pedal?
The accelerator pedal has 4 height positions, while the brake and clutch pedals each have 2 height positions. Choose the position that suits your comfort and gameplay needs.
Can I adjust the spacing of the pedals?
Yes, you can adjust the spacing of the pedals to the left, center, or right. Use the 2.5 mm Allen key to loosen and reposition the screws, then tighten them back in place.
How do I adjust the tilt of the pedals?
To adjust the tilt, loosen the 2.5 mm Allen key screws, rotate the plastic head support 180°, and then re-tighten the screws. This allows for a more or less tilted position depending on your preference.
How do I adjust the travel and resistance of the brake pedal?
Install the metal stop at the rear of the brake pedal arm, then select your desired travel range (long, medium, or short). Tighten the 4 M3-type Allen screws using the 2.5 mm Allen key. Longer travel corresponds to stronger resistance.
What safety precautions should I follow when using the pedal set?
Never use the pedal set with bare feet or only socks. Keep the pedal set away from children during gaming sessions. Avoid placing fingers or thumbs near the sides, rear base, or front base of the pedals to prevent pinching.
What should I do if the pedals are not calibrating correctly?
Power off your console, completely disconnect your wheel, reconnect all cables including the power supply and pedal set cable, then power the console back on and restart your game to recalibrate the pedals.
How do I attach the pedal set to a cockpit?
Attach the pedal set using the small screw threads on the underside. Insert M6 screws into the cockpit’s pedal support plate and the pedal set’s threads. Ensure the screws do not exceed the thickness of the support plate plus 10 mm to avoid damaging internal components.
What is the purpose of the removable CONICAL RUBBER BRAKE MOD?
The removable CONICAL RUBBER BRAKE MOD is a brake module that can be attached to the pedal set for enhanced braking performance. It is secured using a fastening and adjustment nut and requires a 6 mm Allen key for installation.