Retevis RM20 (90 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to mount the transceiver?
To mount the transceiver, use the provided mounting bracket. Attach it to a shelf or dashboard with the included screws, then secure the transceiver to the bracket. Ensure the face of the transceiver is at 90 degrees to your line of sight. You may use a cushion between the transceiver and bracket to reduce vibration.
How to connect the antenna?
Connect the antenna to the ANT connector on the transceiver. Use an antenna with the same natural impedance of 50 ohms. Ensure the antenna is connected before transmitting to avoid damaging the transceiver.
How to connect the power cable?
Connect the DC power cable to the provided connector and an external 13.8V DC power source. Ensure the positive and negative polarities are correctly connected (red is positive, black is negative). Avoid connecting to a 24V battery.
How to replace the fuse?
If the fuse blows or the transceiver stops working, locate the source of the problem and replace the fuse with a new DC15A/32V rated fuse. Always power off the transceiver before replacing the fuse.
How to select a channel?
Use the [CH/WX] key to select a regular channel or weather channel. Hold the key for 1 second to start Dualwatch or Tri-watch. Push the key again to stop the function. Use [16] or [CH/WX] to navigate through channels.
How to program the call channel?
Hold [16] for 1 second to select the call channel of the selected channel group. 'CALL' and the call channel number will appear. Hold [16] again for 3 seconds to enter programming mode and select the desired channel.
How to set channel comments?
While holding [CH/WX], press [16] to edit the channel comment. A cursor and the first character will blink. Use [16] or [CH/WX] to move the cursor and select characters. Press [DSC] to save the comment or [SCAN] to cancel.
How to use the microphone lock function?
To toggle the microphone lock function, hold [HI/LO] on the microphone and turn the power on. This prevents accidental channel changes and function access while the transceiver is in use.
How to use the vibration water draining function?
While holding [CH/WX] and [SCAN], turn the power on. The 'VIB WATER' indicator will appear. A low hum will sound while the function is active, helping to drain water from the speaker housing.
How to start a scan?
Set the scan resume timer in set mode. Press [SCAN] to start a priority or normal scan. During a priority scan, Channel 16 is monitored, and a beep tone will sound when a signal is received. Press [SCAN] again to stop the scan.
Related products from Retevis
RB617
User manual 41 pages
RT-388
User manual 38 pages
RT618
User manual 42 pages
RM01
User manual 51 pages
RB20
User manual 109 pages
RB627B
User manual 43 pages
RT622
User manual 43 pages
RT642
User manual 42 pages
RB645
User manual 43 pages
RT666
User manual 44 pages
NR630
User manual 48 pages
RT98
User manual 51 pages
RT45
User manual 52 pages
RT40
User manual 54 pages
RB85
User manual 60 pages
MB62
User manual 61 pages
RB628B
User manual 62 pages
RT78
User manual 66 pages
Ailunce HD2
User manual 69 pages
RT619
User manual 72 pages