Beta 7041LCD/4S (68 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I adjust the headgear?
To adjust the headgear, rotate the knob gently to modify the width of the band for a comfortable fit. The mask also has five holes on each side for adjusting the viewing angle.
What are the technical specifications of this welding helmet?
The welding helmet features an 98 x 80 mm viewing area, solar cell with lithium battery R2450 power supply. It supports darkness levels from 5–8 for low intensity and 9–13 for high intensity.
How do I select the correct shade setting?
To set the shade level, press the 'SET' button once to activate the SHADE function. Use the UP or DOWN buttons to choose your desired darkness level according to welding current and type.
What is the delay time for switching between dark and light modes?
The delay time can be adjusted from 0.1s to 2.0s, depending on the welding process. Shorter delays (0.1–0.3s) are suitable for spot or short welds while longer ones (0.8–2.0s) help prevent eye fatigue.
How do I test if the filter is working correctly?
To perform a self-test, press and hold the 'T' button after selecting shade and delay time settings. The screen should darken to your selected level, then return to light with the set delay.
What happens when the battery runs out?
When the lithium battery is low, it will flash continuously as a warning signal. Replace the battery immediately for safe operation and ensure proper functionality of the auto-darkening filter.
How do I replace the battery in this helmet?
To change the battery, remove the compartment cover (7) and insert one lithium R2450 battery. Ensure that used batteries are disposed of according to local regulations for environmental safety.
What should I do if my welding mask is not darkening?
If your helmet isn't darkening, check the solar cell and arc sensors for damage or blockage by dust. Ensure that the battery has sufficient charge and verify all settings are correctly configured.
What safety precautions should I take when using this mask?
Always use in a well-ventilated area, avoid wearing loose clothing or jewelry near heat sources, keep children away from your work zone, and ensure the helmet is not used for laser welding or oxygen acetylene processes.
How do I store this welding mask?
Store the welding mask in a dry place to prevent damage. Ensure that all components are properly secured before storage and avoid exposing it to extreme temperatures, moisture, or direct sunlight.