Log in


or


google Continue with Google

Already have an account?

3Com WL-561 (79 pages)

0 out of 5
0 review

Tags

Loading...

Languages available:

No exact matches found. Please change your query

PDF page 1
Loading...
Need help?

Need help?

Do you have a question about the product that is not answered in the manual?

  • Receive updates on solutions
  • Get answers to your question

Ask a question

Select image (Optional)

Product description:

The 3Com WL-561 is a wireless access point designed for reliable and efficient wireless network connectivity. It supports multiple wireless standards and provides seamless integration into existing network infrastructures. The device is suitable for use in small to medium-sized businesses and offers features such as easy configuration, robust signal coverage, and support for multiple client connections. It is built with durable materials and is designed for stable performance in various environments.

Frequently Asked Questions

How do I connect the antennas to the access point?

Carefully unpack the standard detachable antennas that came with your Access Point. Thread each antenna onto an antenna connector on the Access Point and hand-tighten them. After network startup, you may need to adjust the antennas to fine-tune coverage in your area. For best results, adjust the antennas so they are perpendicular to the floor and ceiling.

What is the purpose of the Ethernet port on the access point?

The Ethernet port provides a 10/100BASE-TX Ethernet connection to a 3Com switch. Use a suitable Category 5 cable with straight-through signaling and standard RJ-45 connectors to connect your Access Point to the switch on the network.

How do I mount the access point on a wall or ceiling?

Use the mounting bracket that comes with your Access Point to install it on a wall, ceiling, or electrical box. For additional security, use the included locking bar and a lock (not provided) to lock the Access Point to the cradle after it is mounted to a wall. Route the Ethernet cable through the large opening in the cradle before mounting.

What is the power requirement for the access point?

Power is supplied using an 802.3af Power Over Ethernet (PoE) compliant device. A PoE injector is included. The Access Point can be powered by PoE supplied over the LAN by a 802.3af PoE compliant device such as a switch or hub, or by PoE supplied by the PoE injector included with the Access Point.

How do I connect the power to the access point using PoE?

To power the Access Point using PoE provided by a switch or other 802.3af compliant device, simply plug the network cable from the device into the Access Point’s Ethernet port. To power the Access Point using the 3Com PoE Injector (included with the unit), connect the LAN cable from the switch or hub to the Hub/Switch port on the PoE Injector, then connect a LAN cable from the Ethernet port on the Access Point to the other port on the PoE injector. Plug the PoE Injector into a properly grounded electric outlet.

What are the safety precautions for installing the access point?

This equipment must be installed in compliance with local and national building codes, regulatory restrictions, and FCC rules. Only professional network personnel should install the Access Point. Ensure the socket outlet is near to the unit and easily accessible. Disconnect the power adapter before moving the unit. Observe the minimum body-to-antenna distance of 20 cm (8 in.) when the Access Point is operational. Do not handle the antenna tips, especially after they are connected to the Access Point, to avoid electrostatic discharge (ESD).

What is the MAC address and where can I find it?

The MAC address is a unique identifier for the Access Point. Record the access point MAC address in a safe place before the Access Point is installed in a hard-to-reach location. The MAC address is printed on the back of the Access Point. Additional MAC address labels are shipped with the Access Point.

How do I secure the access point to the mounting bracket?

To install the locking bar, push the locking bar through the opening in the side of the mounting bracket until the hole on the locking bar is exposed. Insert a lock (not provided) through the hole on the locking bar, and then close the lock to secure it in place.

What are the supported wireless standards for the access point?

The 3Com Wireless 7760 Access Point supports wireless network standards including 802.11a and 802.11g. It also includes robust standards-based security features to ensure a secure wireless local area network (WLAN).

What should I do before installing the access point?

Before installing the Access Point, make sure you have all the required items, including the Access Point, two external dual-band antennas, a PoE injector, an Ethernet cable, wall-mounting hardware, and the CD-ROM with the Setup Wizard software and User’s Manual. It is advisable to connect and check the Ethernet cable and LEDs before installing the Access Point in a hard-to-reach location.

Send answer

Your opinion matters to us

Do you think we can improve or add something? Are there features missing or do you have suggestions for improvement? We would love to hear from you.

Give a rating

5 out of 5