TERMA TT-IR (92 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to calibrate the temperature sensor?
To calibrate the temperature sensor, navigate to CF01 in the setup menu. If there is a difference between the room temperature and the displayed temperature, you can correct the error within a range of -4°C to +4°C (in 0.1°C increments). Use the + or – buttons to adjust the value and press OK to confirm and proceed.
How to set the time and day of the week?
To set the time and day of the week, turn the regulator to the desired position. The days will start blinking. Use the + and – buttons to select the desired day and press OK to confirm. Repeat the process to set the current hours and minutes.
How to reset the thermostat to factory settings?
To return to factory settings, turn the regulator to ON/OFF and hold the left button for about 10 seconds until the display shows 'init'. Press OK to confirm or C to cancel the process.
How to enter the AUTO mode?
The AUTO mode displays the measured room temperature and the set temperature. Use the + or – buttons to adjust the desired temperature and press OK to confirm and proceed.
How to adjust the temperature for ECO mode?
To adjust the temperature for ECO mode, use the + or – buttons to set the desired temperature between 10°C and 30°C. Turn the regulator to confirm the setting and complete the process.
How to adjust the temperature for COMFORT mode?
To adjust the temperature for COMFORT mode, use the + or – buttons to set the desired temperature between 10°C and 30°C. Turn the regulator to confirm the setting and complete the process.
How to test the infrared signal?
To test the infrared signal, navigate to CF03 in the setup menu. The thermostat will send an infrared signal every 3 seconds. Check if the receiver responds to the received commands. Turn the regulator to any position to complete the initial configuration.
How to install the thermostat?
Install the thermostat on a wall-mounted heater at a height of 1.5 meters or as a stand-alone unit on a shelf or console. Ensure it is away from heat sources and air currents. Verify that there are no obstacles between the transmitter and receiver that could interfere with the signal.
How to replace the batteries?
To replace the batteries, remove the housing cover using a screwdriver and take out the old batteries. Insert new batteries correctly, then place the housing back on the control unit. Ensure the batteries are properly seated for optimal performance.
How to set the frost protection temperature?
To set the frost protection temperature, use the + or – buttons to adjust the temperature between 5°C and 15°C. Turn the regulator to confirm the setting and complete the process. This ensures the system prevents freezing in cold conditions.