LD Systems LDWS100ML (84 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to synchronize the transmitter and receiver?
To synchronize the transmitter and receiver, align the infra-red port of the transmitter directly with the infra-red interface of the receiver. Turn both devices on and press the ASC button. A red LED will light up during synchronization, and one of the ANTENNA A or B LEDs will light up once the connection is established.
What are the available frequency bands for the U300 series?
The U300 series is available in the following frequency bands: 470 - 490 MHz, 514 - 542 MHz, 584 - 608 MHz, 655 - 679 MHz, 823 - 832 MHz, and 863 - 865 MHz. Note that a license may be required depending on the country of use.
What is the purpose of the pilot tone function?
The pilot tone function helps protect the wireless microphone system from interference by adding an inaudible signal to the actual audio signal. The receiver identifies this signal and ensures the associated audio is transmitted without interference.
How to check the battery status of the hand-held transmitter?
When the hand-held transmitter is turned on, the status LED lights up green if the battery charge is sufficient. If it lights up red, the battery charge is low and should be replaced with new AA batteries.
What should I do if there is no audio signal or the level is too low?
Check if the transmitter is turned on and the batteries are functioning. Ensure the receiver is powered and the antennas are positioned correctly in an upward V-shape. Verify that the radio frequencies of the transmitter and receiver match.
How to adjust the input sensitivity on the pocket transmitter?
Use the MIC / 0dB / -10dB switch to adjust the input sensitivity. Set it so that an active signal causes the amber level LED on the receiver to light up. Avoid overloading the signal, which can cause distortion.
What are the recommended accessories for the U300 series?
Recommended accessories include microphone heads with different pickup patterns, headsets, clip microphones, Lavalier microphones, and guitar cables. These are available for both hand-held and pocket transmitters.
How to replace the batteries in the pocket transmitter?
To replace the batteries, press both markers on the battery cover and open it forward. Remove the used batteries and insert new AA batteries following the diagram. Replace the cover and close it by rotating clockwise. Remove batteries if the transmitter will not be used for a long time to prevent leakage.
What should I do if there is distortion or interference?
Check for sources of interference such as digital devices or other radio systems. Adjust the signal level or input sensitivity on the pocket transmitter. If the issue persists, ensure the transmitter and receiver are within range and aligned properly.
How to ensure optimal reception for the antennas?
Position the antennas in an upward-facing V-shape for optimal reception. Ensure the antennas are not covered or kinked. Maintain a clear line of sight between the transmitter and receiver to avoid signal loss.
Related products from LD Systems
LDWS100MH1
User manual 29 pages
LDWS100MH1
User manual 76 pages
LDWS100MH1
User manual 84 pages
LDWS100MH1
User manual 84 pages
LDWS100MH1
User manual 96 pages
LDWS1000MW
User manual 29 pages
LDWS1000MW
User manual 76 pages
LDWS1000MW
User manual 84 pages
LDWS1000MW
User manual 84 pages
LDWS1000MW
User manual 96 pages
LDWS100GC
User manual 29 pages
LDWS100GC
User manual 76 pages
LDWS100GC
User manual 84 pages
LDWS100GC
User manual 84 pages
LDWS100GC
User manual 96 pages
U300 Serie
User manual 29 pages
U300 Serie
User manual 76 pages
U300 Serie
User manual 84 pages
U300 Serie
User manual 84 pages
U300 Serie
User manual 84 pages