LD LDWS100ML (88 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I synchronize the transmitter with the receiver?
To synchronize the transmitter with the receiver, align the infrared ports of both devices in direct line of sight (about 10 cm apart) and turn on the transmitter. Access the Edit menu on the receiver using the pressure rotary encoder, select 'IR SYNC RUN', and confirm by pressing MENU. The transmitter will briefly display 'IR SYNC ' to confirm successful synchronization.
How do I perform an automatic frequency search?
To perform an automatic frequency search, leave the transmitter turned off but other radio systems on if needed. Access the Edit menu using the pressure rotary encoder, select 'FREQ AUTO RUN', and confirm by pressing MENU. The system will scan for an interference-free frequency, which will be automatically enabled. You can then turn on the transmitter and synchronize it with the receiver.
How do I adjust the frequency group?
To adjust the frequency group, access the Edit menu using the pressure rotary encoder, select 'GROUP', and rotate the encoder to choose from groups 01 to 08. Confirm your selection by pressing MENU. The display will show the selected group and channel.
How do I adjust the frequency channel?
To adjust the frequency channel, access the Edit menu using the pressure rotary encoder, select 'CHANNEL', and rotate the encoder to choose from channels 01 to 12. Confirm your selection by pressing MENU. The display will show the selected group and channel.
How do I manually adjust the radio frequency?
To manually adjust the radio frequency, access the Edit menu using the pressure rotary encoder, select 'FREQ MAN', and rotate the encoder to adjust the frequency in MHz. For finer adjustments in 25 kHz increments, rotate the encoder again to adjust the kHz range. Confirm your settings by pressing MENU.
How do I set a user name for the transmitter and receiver?
To set a user name, access the Edit menu using the pressure rotary encoder, select 'NAME', and rotate the encoder to choose letters, numbers, or symbols for each of the 8 digits. Confirm each selection with MENU. Once all digits are set, the name will be displayed on both the transmitter and receiver during synchronization.
How does the pilot tone feature work?
The pilot tone feature adds an inaudible signal to the transmitted audio to prevent interference from other radio equipment. The receiver identifies this signal and allows the corresponding audio to pass through. Signals without a pilot tone remain muted. You can enable or disable this feature via the 'PILOT TONE' menu option.
How do I adjust the squelch setting?
To adjust the squelch setting, access the Edit menu using the pressure rotary encoder, select 'SQUELCH', and rotate the encoder to choose between LOW, MID, and HIGH settings. The squelch setting suppresses background noise when the transmitter is inactive or when the signal is weak. Confirm your selection by pressing MENU.
How do I adjust the display brightness?
To adjust the display brightness, access the Edit menu using the pressure rotary encoder, select 'BRIGHTNESS', and rotate the encoder to choose between LOW, MID, and HIGH settings. This adjusts the illumination of the OLED display. Confirm your selection by pressing MENU.
How do I lock the receiver controls to prevent unauthorized access?
To lock the receiver controls, access the Edit menu using the pressure rotary encoder, select 'PANEL LOCK', and rotate the encoder to choose ON or OFF. If locked, the display will show 'DISPLAY IS LOCKED', and no changes can be made to the receiver settings. To unlock, press and hold the pressure rotary encoder for about 3 seconds until 'DISPLAY IS UNLOCKED' appears.