Datalogic Star Modem (80 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the STARModem™ used for?
The STARModem™ is a radio modem that enables wireless communication at 433 MHz (European models) or 910 MHz (USA models) between serial devices and Datalogic RF devices or base stations. It supports both Stand Alone and STAR-System™ modes for data transmission and reception.
What devices can the STARModem™ connect?
The STARModem™ can connect to various devices such as Gryphon™ M Readers, Dragon™ M Laser Scanners, Formula Basic Line RF Terminals, and STARGATE™ Base Stations. It is compatible with RF hand-held readers, other STARModem™ units, and RF terminals running STAR&Play™ software.
How does the STARModem™ operate in Stand Alone mode?
In Stand Alone mode, the STARModem™ can function as a Server to receive data from RF devices or as a Client to transmit data to RF devices. It supports RS232, Wedge, and Pen Emulation interfaces for communication.
What are the supported interfaces for the STARModem™?
The STARModem™ supports multiple interfaces including RS232, Wedge, and Pen Emulation. For Pen Emulation, an adapter and a standard cable are required to connect the device to the modem.
What does the Power On LED indicate?
The Power On LED is green and constant, indicating that the STARModem™ is powered on and functioning correctly. If it is red and constant, it may indicate a default configuration or a wrong connection to the Host.
What does the TX/RX LED indicate?
The TX/RX LED is yellow and blinking, indicating that the STARModem™ is either receiving or transmitting data via radio. If it is red and blinking, it may signal a failed radio transaction or an ongoing programming command.
How should the STARModem™ be installed?
The STARModem™ can be installed in different positions using two mounting brackets and an adjustable antenna. The four M4 x 5 screw holes on the modem body are for mechanical fixation, and the installation should follow the guidelines in the manual.
What is required for RS232 interface connection?
For RS232 interface connection, the modem cable must be directly connected to the PC COM port. Ensure that the modem is powered off before making any connections, and use the appropriate adapter and cable for the desired interface.
What is needed for Pen Emulation interface connection?
For Pen Emulation interface connection, an adapter and a Datalogic standard cable are required. The modem must be configured through the RS232 interface, and the hardware jumper position should be set according to the configuration instructions.
What is the difference between Stand Alone mode and STAR-System™ mode?
In Stand Alone mode, the STARModem™ operates with a different RF Narrow Band protocol for uni-directional communication. In STAR-System™ mode, it provides bi-directional wireless communication between the Host and RF devices, and it is connected only through the RS232 interface.