Evolution 005-0002 (64 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the maximum load capacity of the stand?
The stand can support a total weight of 225 kg (496 lb), which includes the chop saw and the workpiece. It is important not to exceed this weight limit to ensure the stability and safety of the equipment during use.
How do I adjust the height of the legs?
To adjust the height of the legs, push in the inner leg locking pin and slide the inner leg to the desired position. Ensure that the inner leg locking pin is fully engaged into the relevant hole in the outer leg tube. All four legs must be set to the same length for stability.
What materials is the stand constructed from?
The stand is constructed from sheet steel for strength and durability. It also includes lightweight but strong tubular components, adjustable extension arms, and height-adjustable workpiece supports for versatility and ease of use.
How do I assemble the fixed clamps?
To assemble the fixed clamps, align the clamp’s body and baseplate with the rectangular hole in the metal table and push fit the clamp’s baseplate from below. Ensure the Nyloc nuts are inserted into the baseplate so the bolts can be inserted through the mounting holes from above and tightened securely.
Can I use the stand on an uneven surface?
No, the stand should only be used on a firm, flat, dry, and level surface to ensure maximum stability during use. Using it on an uneven surface may compromise the safety and performance of the equipment.
How do I attach the chop saw to the stand?
Place the chop saw onto the table with the right-hand edge of the machine’s base resting against the two fixed clamps. Adjust the adjustable clamps to firmly grip the base of the machine and tighten them to secure the machine onto the table.
What should I do if the stand becomes unstable?
If the stand becomes unstable, ensure that all four hinge latching pins are fully engaged with the slots in the hinge plates. Also, check that all four legs are set to the same length and locked into their service position for maximum stability.
How do I clean and maintain the stand?
Keep the stand clean and free from debris generated by cutting processes. Use a soft, long-haired brush to remove any debris from the mechanisms. Avoid using solvents that may damage the plastic parts and apply a light machine oil to lubricate the pivot points and hinges after cleaning.
What is the purpose of the extension arms?
The extension arms are designed to aid the balance and stability of a correctly positioned workpiece. They are not intended to support the full weight of a heavy or long workpiece, and should not be extended beyond their safe working limits.
How do I store the stand when not in use?
When not in use, return the legs to their minimum extension setting, release the legs from their service position, and fold them into their storage position. Ensure they lock in place and use the carry handle to transport the stand to a dry, secure storage location.