ATH M156 (354 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to safely operate the tire mounting machine?
Before using the tire mounting machine, ensure all functions are tested and verified through the control panel to confirm proper operation. Always maintain a safe distance from moving parts and ensure no personnel are in the work area. When releasing the mounting arm lock, keep a safe distance to prevent accidental tipping. Follow all safety instructions to avoid injuries or damage to the machine.
What safety equipment is included in the machine?
The tire mounting machine includes several safety features such as a pressure relief valve for the four-claw clamping unit, a double-sealed relief valve on the boom cylinder, a pressure-limiting valve set to 160 bar ±5%, an overload protection for the hydraulic motor, and mechanical locking of the tool arm. These components ensure safe operation and prevent unintended movements.
How to mount a tire on the machine?
To mount a tire, place the tire on the inner side of the mounting arm table and move the table close to the clamping jaws. Lower the clamping head to the center of the rim, open the clamping jaws until they are smaller than the mounting hole diameter, push the tire over the jaws, and close them until the tire is securely held. Ensure the rim is properly seated in all four clamps and that the tire rotates smoothly before proceeding.
What precautions should be taken during tire mounting?
Before mounting a tire, ensure the rim and tire are undamaged, clean, dry, and in good condition. Remove old balancing weights and inspect both the rim and tire for damage, especially for aluminum rims. Verify that the rim and tire sizes match. Fully release the air from the tire before dismounting. Apply tire lubricant generously to both the rim and tire to prevent damage. Always use a new valve when installing.
How to safely remove a tire from the machine?
To remove a tire, use a valve wrench to release all the air from the tire. Fully press the rim flange against the mounting plate from both sides, applying mounting paste to the rim and flange. Mount the first flange using the mounting chisels, guiding the chisel between the flange and rim, then lever the tire over the rim by lowering the rim and pulling the chisels. Rotate the flange counterclockwise to remove it. Use the pressing plate to remove the second flange.
What is the purpose of the mounting plate?
The mounting plate is used to securely press the rim flange against the tire during the mounting process. It ensures proper alignment and application of mounting paste to both the rim and flange, which helps in achieving a secure and damage-free installation of the tire.
What should be done if the machine exceeds the maximum pressure?
If the machine reaches the maximum pressure during clamping, immediately stop the process to prevent damage to the machine. For aluminum rims, check and adjust the clamping pressure to a lower setting. Continuing to apply pressure beyond the recommended limit may cause severe damage to the machine and compromise the safety of the operation.
How to ensure the rim is properly seated in the clamping jaws?
After placing the tire on the mounting table, lower the clamping head to the center of the rim and open the clamping jaws until they are smaller than the mounting hole diameter. Push the tire over the jaws and close them until the tire is securely held. Check that the rim is properly seated in all four clamps and that the tire rotates smoothly. If the rim is not properly seated, do not proceed with the mounting process.
What is the function of the hydraulic motor overload protection?
The hydraulic motor overload protection is a safety feature that interrupts the power supply to the motor if it overheats. This prevents damage to the motor and ensures the machine operates within safe temperature limits. It is located in the electrical control box and is an essential part of the machine's safety system.
How to maintain the machine for optimal performance?
Regular maintenance of the tire mounting machine includes inspecting and replacing consumable materials such as hydraulic fluid, lubricants, and seals. Follow the maintenance schedule provided in the manual to ensure all components are in good working condition. Check for leaks, wear, and damage to the hydraulic, pneumatic, and electrical systems. Replace any faulty parts promptly to maintain the machine's efficiency and safety.