Vanderbilt PP500-EM (76 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the power supply range for the PP500?
The PP500 operates on a power supply ranging from 12 to 24 volts DC, with a minimum of 10.5 volts DC and a maximum of 35 volts DC.
What is the power consumption of the PP500-EM?
The PP500-EM consumes approximately 17 mA at 24V DC (408 mW) under normal operation, with a maximum of 31 mA (744 mW) when the horn is active. At 12V DC, it uses about 32 mA (384 mW) typically and up to 68 mA (816 mW) when the horn is active.
What is the operating temperature range for the PP500?
The PP500 can operate within a temperature range of -30°C to +50°C, making it suitable for a wide range of environmental conditions.
What is the IP rating of the PP500?
The PP500 has an IP54 rating, which means it is protected against dust and water splashes, ensuring durability in various settings.
What are the reading distances for the PP500?
The PP500 has different reading distances depending on the technology used. For EM4102 (passive), it reads up to 5 cm. For Cotag (passive), it reads up to 5 cm, and for Cotag (active), it reads up to 10 cm.
How does the PP500 enter programming mode?
To enter programming mode, press and hold the 'B' button for 2 seconds during power-up. This is indicated by the red and green LEDs blinking together.
What happens if no cards are presented during programming mode?
If no cards are presented or short code keys are pressed during programming mode, the reader will automatically time out after 60 seconds and return to normal operation.
How can you exit programming mode?
To exit programming mode, press the 'B' button when the red and green LEDs are flashing together, which will cancel the programming mode and return the reader to normal operation.
What is the default configuration when the PP500 powers up?
The default configuration for the PP500 when it powers up is BCLINK, which is used for addressable entry/exit functionality.
What is the purpose of the BCLINK configuration?
The BCLINK configuration is used to define whether the reader is an entry or exit reader, and it allows the reader to be addressed individually in a system with multiple readers.