Telcoma T124 (68 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the purpose of the T124 electronic control unit?
The T124 electronic control unit is designed for automated gate operation, featuring functions like anti-crushing protection, motor speed regulation, soft start, and magnetic end-of-travel sensors. It also supports optional battery charging via CB24.
What are the electrical specifications of the T124?
The T124 operates on 230V AC ±10%, with a frequency range of 50/60 Hz. Its standby current is 100 mA, and maximum load consumption is 1A at 230V. The motor can handle up to 120W.
How do you connect the T124 control unit?
Follow the wiring diagram in Figure 2 for connections. Ensure all NC contacts are shorted when not used, and use separate cables for each device to avoid interference. Connect the antenna properly based on receiver instructions.
What is the function of the P/P button on T124?
The P/P (Passo/Passo) button allows manual step-by-step control during programming or operation, enabling precise movement and testing without affecting automatic functions.
How does the phototest feature work on T124?
Phototest mode uses a sensor to detect obstacles. If triggered, it stops the gate until cleared. It can be used in conjunction with auxiliary outputs for additional safety or signaling purposes.
What is the battery charging capability of CB24?
The optional CB24 charger supports 12V 1.3Ah rechargeable batteries, providing up to 4 cycles within 5 hours when used in conjunction with T124 for emergency power during line failures.
How do you program the opening and pause times?
Use the P/P button along with the PROG function to manually control gate movement. The system learns timing automatically, allowing precise adjustment of open duration and pause intervals through step-by-step operation.
What is the purpose of the dip-switch on T124?
The dip-switch allows configuration of various functions such as motor direction reversal, phototest activation, end-of-travel control, and auxiliary output settings. Changes require a reset or power cycle to take effect.
How do you handle emergency stop functionality on T124?
The STOP button halts gate operation immediately during manual use but is not considered a safety feature. It aids in testing during installation and should be used only for troubleshooting purposes.
What are the dimensions of the T124 control board?
The T124 circuit board measures 90 x 123 mm with a height of 40mm, while the CB24 charger board is smaller at 35 x 58 mm with a height of 18mm.