Hozelock Select Plus 2224 (216 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I adjust the watering days on my Select Plus Timer?
To adjust the watering days, rotate the dial to select the days you want to water. A small droplet symbol will appear over the selected days. Press the dial to confirm your selection. This ensures the timer only waters on the chosen days.
What should I do if the valve opens but no water flows?
If the valve opens but no water flows, check that the water supply is turned on. Ensure the timer is properly connected to the water source and that the batteries are functioning correctly. Also, verify that the watering program is active and the duration is set correctly.
How do I set the start times for my watering programs?
To set the start times, rotate the dial to adjust the hour and minutes. Press the dial to confirm the time. Repeat this for each program (P1, P2, and P3) to set the desired start times. Only the programs that are turned ON will activate the valve at the set time.
What should I do if the timer displays 'BATT'?
The 'BATT' display indicates low battery power. Replace the batteries immediately to ensure the timer continues to function properly. The failure prevention mode will prevent the valve from opening until new batteries are installed.
How do I set a rain delay on my Select Plus Timer?
To set a rain delay, press and hold the dial for 3 seconds. Rotate the dial to select the number of days you want to pause watering (up to 7 days). The rain delay icon will appear on the screen, and the selected days will be marked with an umbrella symbol.
What type of batteries should I use for the Select Plus Timer?
Only use Alkaline or Lithium batteries for the Select Plus Timer. Rechargeable batteries are not recommended as they may cause incorrect operation. Always use new batteries at the start of the watering season for optimal performance.
How do I reset the timer to factory settings?
To perform a factory reset, press and hold the dial and Water Now button together for 8 seconds. This will delete all programmed data. After a reset, you will need to reconfigure the timer settings, including the clock, days, and watering programs.
What is the maximum operating pressure for the Select Plus Timer?
The Select Plus Timer is designed to operate on mains water up to a maximum pressure of 10 bar. Ensure the water supply pressure does not exceed this limit to avoid damage to the timer or improper functioning.
How do I contact Hozelock customer services?
For assistance, contact Hozelock customer services via email at consumer.services@hozelock.com or visit their website at www.hozelock.com. You can also call them at +44 (0) 121 313 313 for support with your Select Plus Timer.
What should I do if the timer stops working after replacing batteries?
If the timer stops working after replacing batteries, ensure the new batteries are correctly inserted and fully charged. Check that the timer is properly connected to the water source and that the programs are set to ON. If the issue persists, contact Hozelock customer services for further assistance.