Uponor Smatrix Base PRO (224 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How do I register a thermostat to the controller?
To register a thermostat, press and hold the OK button on the controller for about 3 seconds until the LED for the selected channel flashes red. Then, select the desired channel using the < or > buttons, and press OK to confirm. The LED will turn green to indicate successful registration.
What is the purpose of the DIP switch on the thermostat?
The DIP switch on the thermostat is used to set specific functions, such as selecting between standard room thermostat, system device, or remote sensor modes. Each position corresponds to a different function, and it must be set correctly for the thermostat to operate as intended.
How do I connect the components of the system?
Connect the components by first attaching the full assembly or parts to the wall using a DIN rail or wall screws. Then, connect the actuators, thermostat communication cables to the controller and/or star module, and the system bus communication cable between controllers. Ensure all wiring is complete and correct before proceeding.
What is the recommended communication topology for the system?
The system uses a daisy chain bus topology for communication, which allows for serial and parallel connections. This makes wiring and connecting thermostats and system devices much easier than connecting one thermostat per terminal. The topology can be combined in any way that suits the current system.
How do I register a system device to the controller?
To register a system device, power up the interface and attach it to the charger. Follow the startup guide until registration, then press the Link Touch Screen to controller or use the Link menu in the Main menu. The selected channel LED will turn green to indicate successful registration.
What should I do if a thermostat is not registering correctly?
If a thermostat is not registering correctly, ensure that the DIP switch is set to the correct function and that the thermostat is connected to the correct channel. If the issue persists, check the wiring and ensure that the controller is in registration mode. You may also need to unregister and re-register the thermostat.
How do I exit registration mode on the controller?
To exit registration mode, press and hold the OK button on the controller for about 3 seconds until the green LEDs turn off. This will end the registration process and return the controller to run mode.
What are the different functions of the public thermostat T-143?
The public thermostat T-143 can be used as a standard room thermostat, a system device with various functions such as outdoor temperature sensing, heating/cooling switch over, or Comfort/ECO switch over. The DIP switch must be set to the appropriate position to enable these functions.
How do I unregister a channel or system device?
To unregister a channel or system device, enter registration mode by pressing and holding the OK button for about 3 seconds. Use the < or > buttons to select the channel or system device, then press both buttons simultaneously for about 5 seconds until the LED for the selected channel starts flashing red.
What is the purpose of the room bypass function?
The room bypass function allows you to bypass certain rooms in the system, which can be useful for maintenance or temporary adjustments. To access this function, ensure the controller is registered to the interface, then navigate to the Room bypass menu in the Main menu and select the desired rooms.