Uponor Smatrix Wave (224 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to register a thermostat to a controller?
To register a thermostat, press and hold the OK button on the controller for about 3 seconds until the LED for the desired channel flashes red. Then, gently press and hold the registration button on the thermostat until the LED starts flashing green. The selected channel LED in the controller will turn fixed green, indicating successful registration.
How to register a system device to a controller?
To register a system device, press and hold the OK button on the controller for about 3 seconds until the LED for the desired channel flashes red. Then, press and hold both the - and + buttons on the thermostat until the text 'CnF (configure)' and a communication icon are displayed. The selected channel LED in the controller will turn fixed green, indicating successful registration.
How to unregister a channel or system device?
To unregister a channel, enter registration mode by pressing and holding the OK button on the controller for about 3 seconds until the LED for the desired channel flashes red. Then, press the < and > buttons simultaneously for about 5 seconds until the LED for the selected channel starts flashing red, indicating successful unregistration.
What is the communication protocol used by the system?
The system uses a bus communications protocol that supports daisy chain, direct, or star topology connections. This allows for serial and parallel connections, making wiring and connection of thermostats and system devices much easier than connecting one thermostat per connection terminal.
How to set the DIP switch for a thermostat?
For public thermostats like the T-143, set the DIP switch to 'ON' for standard room thermostat mode. For Comfort/ECO switch functions, set the DIP switch to '5'. Ensure that the switches are set to one of the available functions to enable registration.
How to connect the power cable?
Connect the power cable to a 230 V AC wall socket. If required by local regulations, connect it to a junction box instead. Ensure that the 230 V AC compartment of the controller is closed and the fixing screw is tightened.
How to set the time and date on thermostats or timer?
Set the time and date on thermostats or the timer (digital thermostat T-148 or timer only). This ensures accurate scheduling and operation of the system.
How to select thermostat control mode?
Select thermostat control mode through the settings menu (menu 04, in digital thermostats only). The default mode is RT (standard room thermostat). This setting determines how the thermostat will control heating or cooling.
What are the functions of the DIP switches?
The DIP switches on the thermostat are used to select different functions such as standard room thermostat, Comfort/ECO switch, or remote sensor. Ensure that the switches are set to one of the available functions to enable registration and proper operation.
How to exit registration mode?
To exit registration mode, press and hold the OK button on the controller for about 3 seconds until the green LEDs turn off. This ends the registration process and returns the system to run mode.