Log in


or


google Continue with Google

Already have an account?

Vaisala RFL100 (114 pages)

0 out of 5
0 review

Tags

Loading...

Languages available:

No exact matches found. Please change your query

PDF page 2
Loading...
Need help?

Need help?

Do you have a question about the product that is not answered in the manual?

  • Receive updates on solutions
  • Get answers to your question

Ask a question

Select image (Optional)

Product description:

The Vaisala RFL100 is a compact and robust rain and liquid water sensor designed for use in meteorological and environmental monitoring applications. It detects the presence of liquid water, including rain, snowmelt, and other forms of precipitation. The sensor operates based on the principle of microwave absorption, allowing it to distinguish between liquid and frozen precipitation. It is suitable for installation in weather stations and remote sensing systems, providing reliable and accurate measurements under various environmental conditions. The RFL100 is known for its low maintenance requirements and long-term stability, making it a reliable choice for continuous monitoring.

Frequently Asked Questions

How do I set up RFL100 with one probe?

To set up RFL100 with one probe, first disconnect any cable connected to the service port. Open the battery cover, turn the power switch to Off, and connect the probe if not already connected. Align the probe's orientation mark with the connector line, push it in without rotating, and then turn the power switch to On. Close the battery cover and ensure the display shows measurement readings without error codes.

What are the steps to set up RFL100 with two temperature probes?

To set up RFL100 with two temperature probes, disconnect any service port cable, open the battery cover, and turn the power switch to Off. Connect the probe splitter to the data logger, then attach the first probe to the splitter and label it as channel 1. Repeat for the second probe and label it as channel 2. Ensure the display shows measurement readings without error codes after powering on.

What is required to connect two temperature probes to RFL100?

To connect two temperature probes to RFL100, you need two temperature-only probes (HMP110T, HMP115T, or TMP115), a probe splitter (Vaisala item code CBL210834), and optional extension cables. Ensure the firmware and software versions are at least RFL100 firmware version 1.2.0, AP10 firmware version 3.0, and viewLinc 5.0.2.

How do I connect a probe to RFL100?

To connect a probe to RFL100, align the probe's orientation mark with the line above the probe connector, then push the probe in all the way without rotating. If using an extension cable, insert the cable connector in the same way as a probe, then connect the probe to the cable. HMP110 and HMP110T probes must always be connected using a cable.

What should I do if the display shows dashes instead of measurement readings?

If the display shows dashes instead of measurement readings, check that the probe is properly connected. You can disconnect the probe or cable by pulling it with the battery cover open. Ensure the battery indicator shows full batteries and there are no error codes displayed.

How do I label the probes when using two temperature probes?

When using two temperature probes, label each probe with a number corresponding to its channel. Attach the label to the thin cable between the probe body and the sensor tip. For TMP115 probes, use the included labels. This helps identify which probe is connected to which channel.

What is the purpose of the probe splitter?

The probe splitter allows you to connect two temperature probes to the RFL100. It is necessary for setting up the device with two probes and helps in assigning each probe to a specific channel. The splitter must be connected to the data logger before setting up the probes.

How do I ensure the RFL100 is properly connected to the access point?

After turning on the RFL100, it will scan for VaiNet access points in installation mode. It will connect to the access point with the best signal strength and wait to be accepted by the administrator of the viewLinc Enterprise Server. Ensure the access point is installed and in installation mode before starting the setup.

What should I do if the battery indicator shows low batteries?

If the battery indicator shows low batteries, ensure the data logger is connected to a power source or replace the batteries. A low battery can cause the device to malfunction or lose data. Always check the battery status before and after using the device.

How do I reset the RFL100 to factory settings?

To reset the RFL100 to factory settings, follow the factory reset procedure outlined in the RFL100 User Guide (M211861EN). This is necessary if you want to switch the device from two-probe mode back to one-probe mode. Ensure you follow the steps carefully to avoid data loss.

Send answer

Your opinion matters to us

Do you think we can improve or add something? Are there features missing or do you have suggestions for improvement? We would love to hear from you.

Give a rating

5 out of 5