Dantherm CDP 65 (116 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
What is the purpose of the cooling circuit in the CDP 35/45/65?
The cooling circuit in the CDP 35/45/65 is responsible for removing moisture from the air. The humid air is drawn into the dehumidifier, where it is cooled below the dew point, causing the water vapor to condense into droplets that are then drained away. The dry, cold air is reheated in the condenser, resulting in a temperature increase of approximately 5°C.
How does the dehumidifier operate when the hygrostat is activated?
When the hygrostat detects humidity levels above 60% RH, it activates the compressor and fans, initiating the dehumidification process. The hygrostat is located near the evaporator at the bottom of the compressor housing. If the humidity is below 60% RH, the dehumidifier will not start when power is applied.
What happens if the temperature at the condenser exceeds 55°C?
If the temperature at the condenser exceeds 55°C, the compressor will automatically stop to prevent overloading. After 45 minutes, the compressor will restart automatically. This is a safety feature to protect the compressor from excessive pressure in the cooling circuit during startup.
What does the green light on the display indicate?
The green light on the display indicates that the dehumidifier is connected to power. If the light is constantly on, it means the unit is operational. If the light blinks green, it may indicate a fault detected by the temperature sensor, and the unit will stop for 45 minutes before restarting automatically.
How can the hygrostat be adjusted to a lower humidity level?
To adjust the hygrostat to a lower humidity level than the default 60% RH, turn the adjustment screw clockwise. This will lower the humidity threshold at which the dehumidifier starts. Ensure the adjustment is made carefully to avoid incorrect operation.
What is the function of the external hygrostat connection?
The external hygrostat connection allows for a separate control system to manage the humidity levels in the swimming pool area. This ensures a more precise and consistent humidity measurement. The output voltage for the external hygrostat is 12 V.
What is the recommended installation distance for the dehumidifier?
The recommended minimum installation distance for the dehumidifier is 225 mm from the wall when mounted on the ceiling or floor. This ensures proper airflow and efficient operation. Avoid placing the unit near heat sources and ensure doors and windows are closed during operation.
How do you access the control panel of the dehumidifier?
To access the control panel, first remove the front cover by unscrewing the two screws at the top of the unit. Lift the cover vertically and pull it away from the dehumidifier. Next, remove the screws on the front of the cover located above the compressor. Push the cover towards the back of the unit and pull it out of the housing to access the control panel.
What is the purpose of the built-in safety circuit?
The built-in safety circuit protects the compressor from overloading by stopping it if the temperature at the condenser exceeds 55°C. This is typically caused by a failed fan or high ambient temperature. After 45 minutes, the compressor will restart automatically to resume normal operation.
What should be done if the dehumidifier is disconnected and reconnected?
If the dehumidifier is disconnected and reconnected, the LEDs will flash green, and the triangle will flash red before the operating status is displayed. This indicates a fault detected by the temperature sensor. The unit will stop for 45 minutes before restarting automatically to ensure safe operation.
Related products from Dantherm
CDF 35T
User manual 4 pages
CDT 22
User manual 50 pages
CDT 35
User manual 50 pages
CDP 35T
User manual 4 pages
CDP 35T
User manual 116 pages
CDT 35S
User manual 50 pages
CDT 50
User manual 50 pages
CDP 65T
User manual 4 pages
CDP 65T
User manual 116 pages
CDP 45T
User manual 114 pages
CDP 45T
User manual 116 pages
CDP 45T
User manual 4 pages
AD 290 B
User manual 84 pages
AD 240 B
User manual 84 pages
AD 400 B
User manual 104 pages
CDP 40-50-70
User manual 24 pages
CDP 40T-50T-70T
User manual 24 pages
CDP 75
User manual 68 pages
CDP 75
User manual 160 pages
CDP 75
User manual 192 pages