GRAPHITE 58G127 (112 pages)
Tags
Languages available:
No exact matches found. Please change your query
Need help?
Do you have a question about the product that is not answered in the manual?
- Receive updates on solutions
- Get answers to your question
Product description:
Frequently Asked Questions
How to insert the battery?
To insert the battery, first ensure the rotation direction switch is in the center position. Press the battery lock button and slide the battery out. Insert the charged battery into the handle until you hear the lock clicks.
How to charge the battery?
To charge the battery, remove it from the drill. Plug the charger into a 230 V AC socket. Place the battery in the charger. The red LED will indicate the charging status. A green light means power is connected, a red light means the battery is fully charged, and a flashing red light indicates the battery is charging.
What is the maximum torque?
The maximum torque of the drill is 20 Nm. This value is achieved when the torque adjustment ring is set to the highest position, which is typically used for drilling operations.
How to change the rotation direction?
To change the rotation direction, use the rotation direction switch. Set it to the leftmost position for clockwise rotation and to the rightmost position for counterclockwise rotation. Always ensure the switch is in the center position when not in use to prevent accidental activation.
What are the safety precautions for using the drill?
Always wear hearing protection when using the drill. Avoid changing the rotation direction while the tool is operating. Keep the battery away from heat sources and do not leave it in high-temperature environments. Do not use the drill with a damaged cord or plug. Ensure the charger is only used with the original battery.
How to adjust the torque?
To adjust the torque, use the torque adjustment ring. Set it to the desired position based on the type of screw and material. Start with a lower torque setting and gradually increase it until the desired result is achieved. For drilling, use the setting marked with the drill symbol.
What are the technical specifications of the drill?
The drill has a 18 V DC battery, a Ni-Cd battery type, and a 1500 mAh capacity. The no-load speed range is 0-350 or 0-1000 min-1. The torque adjustment range is 1-23, with drilling as an additional option. The maximum torque is 20 Nm, and the IP rating is III. The weight with the battery is 1.84 kg.
How to replace the chuck?
To replace the chuck, first ensure the rotation direction switch is in the center position. Open the chuck jaws by turning the rear grip and loosen the fixing screw. Remove the chuck and install the new one by turning it clockwise. Always ensure the chuck is securely tightened.
What is the noise level of the drill?
The acoustic pressure level of the drill is 67 dB(A) with a variation of 3 dB(A). The acoustic power level is 78 dB(A) with a variation of 3 dB(A). These values are measured under standard operating conditions and are important for assessing the noise exposure during use.
How to maintain the drill?
Regularly clean the drill with a soft, dry cloth. Avoid using any detergents or alcohol. Always disconnect the charger from the power source before cleaning. Store the battery in a cool, dry place and avoid exposing it to high temperatures. If the battery overheats during charging, stop the process and wait 30 minutes before continuing.
Related products from GRAPHITE
58G602
User manual 43 pages
58G792
User manual 48 pages
58G792
User manual 55 pages
58G792
User manual 96 pages
58G601
User manual 80 pages
58G718
User manual 86 pages
58G715
User manual 96 pages
58G717
User manual 100 pages
58G518
User manual 103 pages
58G518
User manual 104 pages
58G509
User manual 104 pages
58G121
User manual 108 pages
58G121
User manual 132 pages
58G116
User manual 112 pages
58G224
User manual 140 pages
58G219
User manual 144 pages
58G225
User manual 144 pages
58G215
User manual 152 pages
58G214
User manual 153 pages
58G227
User manual 156 pages