Log in


or


google Continue with Google facebook Continue with Facebook

Already have an account?

GRAPHITE 58G792 (96 pages)

0 out of 5
0 review

Tags

Loading...

Languages available:

No exact matches found. Please change your query

Loading...
Need help?

Need help?

Do you have a question about the product that is not answered in the manual?

  • Receive updates on solutions
  • Get answers to your question

Ask a question

Select image (Optional)

Product description:

The GRAPHITE 58G792 is a high-performance drill designed for precision and durability. It features a graphite coating that reduces friction and heat during drilling, enhancing tool life and efficiency. The drill is suitable for a wide range of materials, including metal, wood, and plastic. Its optimized geometry ensures smooth cutting and minimal wear, making it ideal for both professional and industrial applications. The design allows for high-speed operation while maintaining accuracy and stability.

Frequently Asked Questions

How to attach a drill bit or screwdriver bit?

To attach a drill bit or screwdriver bit, loosen the quick-release collet (1) until the jaws provide enough space to insert the bit. Push the tool into the collet until it meets resistance, then tighten the collet by turning the loosened ring. Always start with a lower torque setting and gradually increase it for optimal performance.

How to change the direction of rotation?

To change the direction of rotation, use the rotation direction switch (5). Set it to the extreme left position for clockwise rotation and to the extreme right position for counterclockwise rotation. Ensure the tool is not in motion when changing the direction.

How to adjust the speed of rotation?

During operation, adjust the speed by pressing and holding the trigger (7). Increasing or decreasing the pressure on the trigger allows for a smooth start and better control when driving or removing screws. This feature helps maintain precision and prevents overloading.

How to adjust the torque setting?

To adjust the torque setting, rotate the torque adjustment ring (2) to the desired position. This permanently sets the clutch to a specific torque level. Once the set torque is reached, the overload clutch disengages, protecting the tool and preventing over-driving or damage. Choose appropriate torque settings based on the material and screw type.

How to switch between speed gears?

Use the speed gear switch (3) to select between gear I and gear II. Gear I provides a lower speed range with higher torque, suitable for heavy-duty tasks. Gear II offers a higher speed range with lower torque, ideal for lighter materials. Ensure the tool is not in motion when changing gears.

How to safely turn off the tool?

To turn off the tool, release the pressure on the trigger (7). If continuous operation is required, press and hold the trigger to activate the lock switch (6), then release the trigger. Always ensure the tool is disconnected from power before performing any maintenance or cleaning.

What are the safety precautions when using the tool?

Always wear eye and ear protection. Ensure the work area is well-lit and has enough space. Never operate the tool in explosive atmospheres. Keep the ventilation holes clean and clear. Disconnect the tool from power before cleaning or maintenance. Only use the tool for its intended purpose and avoid using it in ways that could cause injury.

How to clean the tool?

After each use, clean the tool with a brush or compressed air at low pressure. Avoid using water or other liquids, as they can damage plastic components. Regularly clean the ventilation slots to prevent overheating. Never use chemical cleaners or solvents, as they may degrade the tool's materials.

What are the technical specifications of the tool?

The tool operates on 230 V AC at 50 Hz with a nominal power of 250 W. It has a no-load speed range of 0-400 min⁻¹ in gear I and 0-1450 min⁻¹ in gear II. The collet range is 0.8-10 mm, and the torque adjustment range is 1-23 Nm with drilling mode. The tool weighs 1.3 kg and has an IP II protection class.

How to replace the carbon brushes?

To replace the carbon brushes, first remove the brush covers (4). Extract the worn or damaged brushes, then clean any residual carbon dust with compressed air. Insert new brushes into the holders, ensuring they fit freely. Reinstall the brush covers and test the tool without load for about 3 minutes to allow the brushes to seat properly. Always use original replacement parts and consult a qualified technician.

Send answer

Additional user manuals for the same series

Your opinion matters to us

Do you think we can improve or add something? Are there features missing or do you have suggestions for improvement? We would love to hear from you.

Give a rating

5 out of 5